Standard Icon

Communications Standards

Standard Name
Status Help less all
802.1Qbf-2011 - Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks--Amendment 19: PBB-TE Infrastructure Segment ProtectionThis amendment to IEEE Std 802.1Q-2011 specifies localized protection of selected Traffic Engineered Service Instances traversing a common... Active Standard
269-2010 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets and headsets.... Active Standard
1680-2009 - Environmental Assessment of Electronic ProductsGuidance and implementation procedures for the IEEE 1680 family of standards is provided, and the methods by which manufacturers may declare... Active Standard
11073-30200a-2011 - Point-of-care medical device communication Part 30200: Transport profile--Cable connected Amendment 1ISO/IEEE Std 11073-30200:2004 is extended in this amendment to include IEEE 802.3 100BASE-T and analysis of the compatibility of cable connections... Active Standard
11073-10406-2011 - Personal health device communication Part 10406: Device specialization--Basic electrocardiograph (ECG) (1- to 3-lead ECG)Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between... Active Standard
1278.1-2012 - Distributed Interactive Simulation--Application ProtocolsData messages, known as Protocol Data Units (PDUs), that are exchanged on a network among simulation applications are defined. These PDUs are for... Active Standard
1901-2010 - Broadband over Power Line Networks: Medium Access Control and Physical Layer SpecificationsA standard for high-speed communication devices via electric power lines, so called broadband over power line (BPL) devices, is defined.... Active Standard
1905.1-2013 - a Convergent Digital Home Network for Heterogeneous TechnologiesAn abstraction layer for multiple home networking technologies that provides a common interface to widely deployed home networking technologies is... Active Standard
1701-2011 - Optical Port Communication Protocol to Complement the Utility Industry End Device Data TablesThis standard provides multi-source and "plug and play" environment for the millions of metering devices in the field now and the future using the... Active Standard
1702-2011 - Telephone Modem Communication Protocol to Complement the Utility Industry End Device Data TablesThis standard provides multisource and "plug and play" environment for the millions of metering devices in the field now and in the future using... Active Standard
269a-2012 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets--Amendment 1Practical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets... Active Standard
1900.1a-2012 - Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management Amendment 1: Addition of New Terms and Associated DefinitionsAn amendment to the published IEEE Std 1900.1-2008 to add new terms and definitions. Active Standard
1680.2-2012 - Environmental Assessment of Imaging EquipmentA clear and consistent set of environmental performance criteria for the design of imaging equipment products is established, providing an... Active Standard
1680.3-2012 - Environmental Assessment of TelevisionsA clear and consistent set of environmental performance criteria for the design of televisions is established, providing an opportunity for... Active Standard
C63.19-2011 - American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing AidsAvailable in PDF only. Uniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Active Standard
1903-2011 - the Functional Architecture of Next Generation Service Overlay NetworksA framework of Internet Protocol (IP)-based service overlay networks is described and context-aware [e.g., such as required Quality of Service ... Active Standard
1622-2011 - Electronic Distribution of Blank Ballots for Voting SystemsThis standard specifies electronic data interchange formats for blank ballot distribution, primarily to assist in satisfying the needs of the... Active Standard
1900.5-2011 - Policy Language Requirements and System Architectures for Dynamic Spectrum Access SystemsThis standard defines a vendor-independent set of policy-based control architectures and corresponding policy language requirements for managing... Active Standard
802-1955 - AIEE Proposed Trail Use Test Code DIRECT -- CURRENT CARBON -- PILE VOLTAGE REGULATORS for AIRCRAFTIt is the purpose of this code to define uniform acceptable methods of making tests to determine that the rating, performance and other... Active Standard
145-1983 - Standard Definitions of Terms for AntennasIt is assumed in this standard that an antenna is a passive linear reciprocal device. Thus, where a definition implies the use of an antenna in a... Superseded Standard
145-1993 - Standard Definitions of Terms for AntennasDefinitions of terms in the field of antennas are provided. Keywords: antennas, definitions, propagation, terminology Active Standard
152-1953 - Recommended Practice for Volume Measurements of Electric Speech and Program Waves Superseded Standard
152-1991 - Audio Program Level MeasurementTwo audio program level measuring devices, the peak-program meter and the standard volume indicator, are described. The peak-program meter is... Withdrawn Standard
155-1960 - Standards on Circuits: Definitions of Terms for Linear Signal Flow Graphs, 1960This glossary reprinted from Proc. IRE (USA) vol.48, no.9, Sept.1960 contains 29 definitions with footnotes mostly related to the concepts of... Withdrawn Standard
167A.1-1995 - Standard Facsimile Test Chart: Bi-level (Black & White)A facsimile test chart for assessing performance of document facsimile systems, including any compatible combination of facsimile equipment,... Withdrawn Standard
167A.2-1996 - Standard Facsimile Test Chart: High Contrast (Gray Scale)A means of assessing performance of document facsimile systems, including any compatible combination of facsimile equipment, computers,... Withdrawn Standard
167A.3-1997 - Standard Facsimile Test Chart - ColorA facsimile test chart for assessing performance of document facsimile systems, including any compatible combination of facsimile equipment,... Withdrawn Standard
168-1956 - Standard Definitions of Terms for FacsimileNO Abstract Withdrawn Standard. Withdrawn Date: Dec 06, 1990. Withdrawn Standard
182-1961 - Standards on Radio Transmitters: Definitions of TermsNo abstract Withdrawn Standard. Withdrawn Date: Dec 06, 1990. Withdrawn Standard
182A-1964 - Standard Definitions of Terms for Radio Transmitters Withdrawn Standard
183-1958 - Technical Committee Report: Methods for Testing Radiotelegraph Transmitters (Below 50 MC)The standardisation of methods of testing radio telegraph transmitters is considered. The classification of tests to be performed is discussed,... Withdrawn Standard
186-1948 - Standard Methods of Testing Amplitude-Modulated Broadcast ReceiversA definition of terms is given, and the requirements and characteristics of testing apparatus are discussed. Test procedures for input... Withdrawn Standard
189-1955 - Standard Method of Testing Receivers Employing Ferrite Core Loop AntennasThis standard describes a modification of existing techniques which allows for the measurement of a receiver employing a ferrite core loop antenna... Withdrawn Standard
205-1958 - Standards on Television: Measurement of Luminance Signal LevelsDescribes methods of measuring the significant amplitude levels of a monochrome or color television signal, either composite or noncomposite. The... Withdrawn Standard
205-2001 - Standard on Television: Measurement of Luminance Signal LevelsA method of measuring the amplitude levels of an SMPTE 170M-1994; NTSC color or monochrome television video signal is described. It is concerned... Withdrawn Standard
206-1960 - Standards on Television: Measurement of Differential Gain and Differential PhaseDescribes a method for measuring differential gain and differential phase in equipment transmitting either monochrome or color television signals.... Withdrawn Standard
208-1960 - Standards on Video Techniques: Measurement of Resolution of Camera Systems, 1961This standard is a revision of Part II of 50 IRE23.S1, and replaces it in all respects. One of the major characteristics of a television system... Withdrawn Standard
208-1995 - Standard on Video Techniques: Measurement of Resolution of Camera Systems, 1993 TechniquesThe methods for measuring the resolution of camera systems are described. The primary application is for users and manufacturers to quantify the... Active Standard
269-1983 - Standard Method for Measuring Transmission Performance of Telephone Sets Superseded Standard
269-1992 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone SetsPractical methods for measuring the transmission characteristics of both digital and conventional two-wire analog telephone sets by means of... Superseded Standard
269-2002 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and HeadsetsPractical methods for making laboratory measurements of electroacoustic characteristics of analog and digital telephones, handsets, and headsets... Superseded Standard
269a-2007 - Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets Amendment 1This document amends IEEE Std 269-2002. It covers the areas of: analog telephones; digital telephones; electroacoustic measurements on telephones;... Superseded Standard
312-1977 - Standard Definitions of Terms for Communication SwitchingThis standard is in the form of a telecommunications switching glossary. Attached to this glossary is a permuted index of all terms defined. This... Withdrawn Standard
367-1987 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultWire-line telecommunication facilities serving electric power stations often require that extraordinary protection measures be taken to protect... Superseded Standard
367-1996 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Superseded Standard
367-2012 - Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power FaultGuidance for the calculation of power station ground potential rise (GPR) and longitudinal induction (LI) voltages is provided, as well as... Active Standard
368-1977 - Recommended Practice for Measurement of Electrical Noise and Harmonic Filter Performance of High-Voltage Direct-Current Systems Withdrawn Standard
378-1986 - Standard on Network Analyzers (100 kHz to 18 GHz)This standard was written for users and manufacturers of automatic network analyzers. The purpose of the standard is to provide common terminology... Withdrawn Standard
455-1985 - Standard Test Procedure for Measuring Longitudinal Balance of Telephone Equipment Operating in the Voice BandThe purpose of this standard is threefold: to define the basic requirements of a test circuit which can be used to measure longitudinal balance.... Withdrawn Standard
469-1988 - Recommended Practice for Voice-Frequency Electrical-Noise Tests of Distribution TransformersThe standard provides instruction for the testing of distribution transformers as sources of voice-frequency noise. These tests measure the degree... Withdrawn Standard
511-1979 - Standard on Video Signal Transmission Measurement of Linear Waveform DistortionThe standard describes methods for measuring the linear waveform distortions of TV video signals, that is, distortions which are caused by... Withdrawn Standard
618-1984 - Standard Measurement of Luminance Signal-to-Noise Ratio in Video Magnetic-Tape Recording Systems Withdrawn Standard
661-1979 - Standard Method for Determining Objective Loudness Ratings of Telephone ConnectionsTo describe a practical and reproducible method of determining the loudness ratings of telephone connections. Loudness ratings may be measured... Active Standard
686-1990 - Standard Radar DefinitionsThis standard is published for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Withdrawn Standard
686-1997 - Standard Radar DefinitionsDefinitions for the purpose of promoting clarity and consistency in the use of radar terminology are provided. The definitions represent the... Superseded Standard
686-2008 - Standard Radar DefinitionsDefinitions are provided for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Active Standard
743-1984 - Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency CircuitsThe purpose of this standard is to establish functional requirements for measuring analog transmission characteristics of voice frequency... Superseded Standard
743-1995 - Standard Equipment Requirements and Measurement Techniques for Analog Transmission Parameters for TelecommunicationsPerformance requirements for test equipment that measures the analog transmission parameters of subscriber loops, message trunks, PBX trunks, and... Withdrawn Standard
746-1984 - Performance Measurements of A/D and D/A Converters for PCM Television Video CircuitsThis standard describes methods for measuring the performance of uniformly coded analog-to-digital (A/D) converters and digital-to-analog (D/A)... Withdrawn Standard
752-1986 - Functional Requirements for Methods and Equipment for Measuring the Performance of Tone Address Signal SystemsThis standard provides brief descriptions of applicable tone address signaling techniques and definitions of the related signaling parameters that... Withdrawn Standard
753-1983 - Standard Functional Methods and Equipment for Measuring the Performance of Dial-Pulse (DP) Address Signaling Systems9/90: Revision in progress. Withdrawn Standard
776-1987 - Guide for Inductive Coordination of Electric Supply and Communication LinesThis guide addresses the inductive environment that exists in the vicinity of electric power and wire line telecommunications systems and the... Superseded Standard
776-1992 - Recommended Practice for Inductive Coordination of Electric Supply and Communication LinesThe inductive environment that exists in the vicinity of electric power and wire-line telecommunications systems and the interfering effects that... Active Standard
802-1990 - IEEE Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Active Standard
802.11-1997 - Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThe medium access control (MAC) and physical characteristics for wireless local area networks (LANs) are specified in this standard, part of a... Superseded Standard
802.11-1999 - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specificationsThis standard is a revision of IEEE Std 802.11-1997. The Management Information Base according to OSI rules has been removed, many redundant... Superseded Standard
802.11-2012 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Active Standard
802.11-2007 - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) SpecificationsThis revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as... Superseded Standard
812-1984 - Standard Definitions of Terms Relating to Fiber OpticsNo Abstract Withdrawn Standard
820-1984 - Standard Telephone Loop Performance Characteristics This standard covers the general parameters and characteristics associated with telephone loops from the subscriber signaling and analog voice... Superseded Standard
820-2005 - Standard Telephone Loop Performance CharacteristicsCommon denominators for subscriber line performance, independent of facility types, construction processes or equipment, and circuit provisioning... Active Standard
823-1989 - Standard Methodologies for Specifying Voicegrade Channel Transmission Parameters and Evaluating Connection Transmission Performance for Speech TelephonyThis IEEE Std 823-1989 provides network planners with the methodology and models for calculating the transmission performance of connections made... Withdrawn Standard
847-1982 - Standard Definitions of Digital Terms Relating to Television Withdrawn Standard
973-1990 - Standard Definitions of Switching System Performance in a Telecommunications EnvironmentThis standard provides definitions of switching system performance in a telecommunications environment. It includes parameters in seven categories... Withdrawn Standard
1007-1991 - Standard Methods and Equipment for Measuring the Transmission Characteristics of Pulse-Code Modulation (PCM) Telecommunications Circuits and SystemsTest equipment requirements and methods for testing the transmission characteristics of PCM telecommunications equipment, circuits, and systems... Withdrawn Standard
1027-1984 - Draft Trial-Use Standard Method for Measuring the Magnetic Field Intensity Around a Telephone ReceiverDescribes the methodology for determining the magnetic-field intensity in the proximity of a telephone receiver. The impetus for this work was... Superseded Standard
1027-1996 - Standard Method for Measurement of the Magnetic Field in the Vicinity of a Telephone ReceiverThe methodology for measuring the magnetic field strength in the vicinity of a telephone receiver is described. Withdrawn Standard
1051-1988 - Recommended Practice for Parameters to Characterize Digital Loop PerformanceThe purpose of this recommended practice is to suggest a set of transmission performance parameters to be used in the development of standards for... Withdrawn Standard
1137-1991 - Guide for the Implementation of Inductive Coordination Mitigation Techniques and ApplicationIEEE Std 1137-1991 provides guidance for controlling or modifying the inductive environment and the susceptibility of affected wire line... Active Standard
1180-1990 - Standard Specifications for the Implementations of 8x8 Inverse Discrete Cosine TransformThis standard specifies the numerical characteristics of the 8*8 inverse discrete cosine transform (IDCT) for use in visual telephony and similar... Withdrawn Standard
1206-1994 - Standard Methods for Measuring Transmission Performance of Telephone Handsets and HeadsetsPractical methods for measuring the transmission characteristics of a telephone handset or headset by means of using a test connection to obtain... Superseded Standard
1278-1993 - Protocols for Distributed Interactive Simulation Applications--Entity Information and InteractionData messages, called protocol data units (PDUs), that are exchanged between simulation applications are defined. These PDUs provide information... Superseded Standard
1278.1-1995 - Distributed Interactive Simulation - Application ProtocolsData messages, known as protocol data units (PDUs), that are exchanged on a network between simulation applications are defined. These PDUs are... Superseded Standard
1278.1a-1998 - Distributed Interactive Simulation Application ProtocolsData messages, known as protocol data units (PDUs), that are exchanged on a network between simulation applications are defined. These PDUs are... Superseded Standard
1278.2-1995 - Distributed Interactive Simulation - Communication Services and ProfilesCommunication services to support information exchange between simulation applications participating in the distributed interactive simulation ... Active Standard
1278.3-1996 - Recommended Practice for Distributed Interactive Simulation - Exercise Management and FeedbackGuidelines are established for exercise management and feedback in distributed interactive simulation (DIS) exercises. Guidance is provided to... Active Standard
1278.4-1997 - Recommended Practice for Distributed Interactive Simulation—Verification, Validation, andAccreditationGuidelines are established for the verification, validation, and accreditation (VV&A) of distributed interactive simulation (DIS) exercises. ... Active Standard
1329-1999 - Standard Method for Measuring Transmission Performance of Handsfree Telephone SetsTechniques for objective measurement of electroacoustic and voice switching characteristics of analog and digital handsfree telephones (HFTs) are... Superseded Standard
1329-2010 - Standard Method for Measuring Transmission Performance of SpeakerphonesThis standard provides techniques for objective measurement of electroacoustic and voice-switching characteristics of speakerphones that connect... Active Standard
1390-1995 - Utility Telemetry Service Architecture for Switched Telephone NetworkThis IEEE standard describes a utility telemetry service architecture operated over the telephone network. The architecture described is a basic... Withdrawn Standard
1390.2-1999 - Utility Telemetry Service - Telemetry Interface Unit (TIU) to Telephone NetworkThe telephone network interface to a telemetry interface unit operating under the utility telemetry service architecture is described. The... Withdrawn Standard
1390.3-1999 - Automatic Meter Reading via Telephone - Network to Utility ControllerThis telephone network interface to a utility controller operating under the utility telemetry service architecture is described. The interface is... Withdrawn Standard
1516-2000 - Modeling and Simulation (M&S) High Level ARchitecture (HLA) - Framework and RulesThe High Level Architecture (HLA)~Framework and Rules is the capstone document for a family of related HLA standards. It defines the HLA, its... Superseded Standard
1516-2010 - Modeling and Simulation (M&S) High Level Architecture (HLA)-- Framework and RulesThis standard, describing the framework and rules of the High Level Architecture (HLA), is the capstone document for a family of related HLA... Active Standard
1516.1-2000 - Modeling and Simulation (M&S) High Level Architecture (HLA) Federate Interface SpecificationThe high level architecture [HLA] has been developed to provide a common architecture for distributed modeling and simulation. The HLA defines an... Superseded Standard
1516.1-2010 - Modeling and Simulation (M&S) High Level Architecture (HLA)-- Federate Interface SpecificationThe High Level Architecture (HLA) has been developed to provide a common architecture for distributed modeling and simulation. The HLA defines an... Active Standard
1516.2-2000 - Modeling and Simulation (M&S) High Level Architecture (HLA) - HLA Object Model Template (OMT) SpecificationThe High Level Architecture (HLA)~Object Model Template (OMT) specification defines the format and syntax (but not content) of HLA object models.... Superseded Standard
1516.2-2010 - Modeling and Simulation (M&S) High Level Architecture (HLA)-- Object Model Template (OMT) SpecificationThe High Level Architecture (HLA)—Object Model Template (OMT) specification defines the format and syntax (but not content) of HLA object models.... Active Standard
1516.3-2003 - Recommended Practice for High Level Architecture (HLA) Federation Development and Execution Process (FEDEP)The processes and procedures that should be followed by users of the High Level Architecture (HLA)to develop and execute federations are de .ned... Superseded Standard
1516.4-2007 - Recommended Practice for Verification, Validation, and Accreditation of a Federation - an Overlay to the High Level Architecture Federation Development and Execution ProcessThis recommended practice defines the processes and procedures that should be followed to implement Verification, Validation, and Accreditation ... Active Standard
1521-2003 - Measurement of Video Jitter and WanderA set of metrics and methods to enable consistent measurement of the components of timing interval error in video synchronization signals is... Active Standard
1631-2008 - Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USAThis recommended practice provides a standardized body of theory, techniques, and procedures for measuring the spectral characteristics of 8-VSB... Active Standard
1652-2008 - the Application of Free Field Acoustic Reference to Telephony MeasurementsThis standard provides the techniques and rationale for referencing acoustic telephony measurements to the free field. It applies to ear related... Active Standard
1680-2006 - Environmental Assessment of Personal Computer Products, including Laptop Personal Computers, Desktop Personal Computers, and Personal Computer MonitorsIEEE Std 1680-2006 provides a set of environmental performance criteria for notebook computers, desktop computers, and computer monitors. In... Active Standard
1775-2010 - Power Line Communication Equipment--Electromagnetic Compatibility (EMC) Requirements--Testing and Measurement MethodsElectromagnetic compatibility (EMC) criteria and consensus test and measurements procedures for broadband over power line (BPL) communication... Active Standard
1900.1-2008 - Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum ManagementThis standard provides definitions and explanations of key concepts in the fields of spectrum management, cognitive radio, policy-defined radio,... Active Standard
1900.2-2008 - Recommended Practice for the Analysis of In-Band and Adjacent Band Interference and Coexistence Between Radio SystemsTechnical guidelines are provided in this recommended practice for analyzing the coexistence or, alternatively, the interference between radio... Active Standard
1900.4-2009 - Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access NetworksThe building blocks comprising (i) network resource managers, (ii) device resource managers, and (iii) the information to be exchanged between the... Active Standard
1900.4a-2011 - Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks Amendment 1: Architecture and Interfaces for Dynamic Spectrum Access Networks in White Space Frequency BandsAdditional components of the IEEE 1900.4 system are defined in this amendment to enable mobile wireless access service in white space frequency... Active Standard
1900.4.1-2013 - Draft Interfaces and Protocols Enabling Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless NetworksUsing the IEEE 1900.4 standard as a baseline standard, detailed description of interfaces and service access points defined in the IEEE 1900.4... Active Standard
1900.6-2011 - Spectrum Sensing Interfaces and Data Structures for Dynamic Spectrum Access and other Advanced Radio Communication Systems.The interfaces and data structures required to exchange sensing-related information in order to increase interoperability between sensors and... Active Standard
1902.1-2009 - Long Wavelength Wireless Network ProtocolThis standard defines the air interface for radiating transceiver radio tags using long wavelength signals (kilometric and hectometric frequencies... Active Standard
2030-2011 - Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and LoadsIEEE Std 2030 provides alternative approaches and best practices for achieving smart grid interoperability. It is the first all-encompassing IEEE... Active Standard
C63.19-2007 - American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. American national... Active Standard
C63.19-2001 - American National Methods of Measurement of Capatibility between Wireless Communication Devices and Hearing AidsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth in this standard. Active Standard
C63.19-2006 - Method of Measurement for Hearing Aid Compatibility with Wireless CommunicationsUniform methods of measurement for compatibility between hearing aids and wireless communications devices are set forth. Active Standard