Standard Icon

Aerospace Electronics Standards

Standard Name
Status Help less all
671-1985/Cor 1-2010 - Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block DiagramsIEEE Std 671-1985 provides specifications and test requirements for a non-gyroscopic inertial angular sensor that may measure angular jerk,... Active Standard
62530-2011 - SystemVerilog – Unified Hardware Design, Specification, and Verification LanguageThis standard represents a merger of two previous standards: IEEE Std 1364™-2005 Verilog hardware description language (HDL) and IEEE Std 1800... Active Standard
802-1955 - AIEE Proposed Trail Use Test Code DIRECT -- CURRENT CARBON -- PILE VOLTAGE REGULATORS for AIRCRAFTIt is the purpose of this code to define uniform acceptable methods of making tests to determine that the rating, performance and other... Active Standard
127-1963 - Aerospace Equipment Voltage and Frequency RatingsThe basic purpose of IEEE 127 is to serve as a guide to show preferred (steady-state) frequency and voltage ratings for primary power systems. A... Withdrawn Standard
128-1976 - Guide for Aircraft Electric SystemsThis document provides in compact form recommendations and technical reasons for the selection, design and application of aircraft electric power... Withdrawn Standard
132-1953 - Test Code for D-C Aircarft Rotating Machines Withdrawn Standard
134-1955 - Trial-Use Test Code for Direct-Current Carbon-Pile Voltage Regulators for Aircraft Withdrawn Standard
135-1969 - Recommended Practice for Aircraft, Missile, and Space Equipment Electrical Insulation TestsIt is the purpose of this Recommended Practice to define acceptable methods of testing electrical insulation in flight electric equipment. Test... Withdrawn Standard
136-1959 - Trial-Use Test Procedure and Presentation of Aircraft Generator and Regulator Characteristics Withdrawn Standard
137-1960 - Trial-Use Test Procedure for AC 400 Hz Aircraft Induction Motors Withdrawn Standard
138-1960 - Trial-Use Test Procedure for Aircraft Alternating-Current Generators Withdrawn Standard
172-1983 - Standard Definitions of Navigation Aid TermsThis standard represents a revision of material contained in the previous edition of IEEE Std 172-1971. The committee reviewed all of the terms,... Withdrawn Standard
173-1959 - Standards on Navigation Aids: Direction Finder Measurements, 1959 Withdrawn Standard
292-1969 - Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate GyrosThis specification defines the requirements for a single-degree-of-freedom spring-restrained rate gyro for aircraft, missile and spacecraft... Active Standard
293-1969 - Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate GyrosThis test procedure is a compilation of recommended rate gyro test procedures derived from those currently in use, including test conditions to be... Active Standard
307-1969 - Standard Definitions of Terms For Solar CellsThis IEEE standard provides uniform and acceptable terms for use in the application of solar cells to power systems. The terms are useful in... Withdrawn Standard
337-1972 - Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance AccelerometerThis standard was prepared by the Gyro and Accelerometer Panel of the Aerospace Electronics Systems Group of the Institute of Electrical and... Superseded Standard
517-1974 - Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating GyrosThis specification defines the requirements for a single-degree-of-freedom rate-integrating gyro to be used as a sensor in systems such as an... Active Standard
521-1984 - Standard Letter Designations for Radar-Frequency BandsSince World War II, radar systems engineers have used letter designations as a short notation for describing the frequency band of operation. This... Superseded Standard
521-2002 - Standard Letter Designations for Radar-Frequency BandsThe Standard Letter Designations for Radar-Frequency Bands was first issued in 1976 and was written to remove the confusion that developed from... Active Standard
528-1984 - Standard Inertial Sensor TerminologyWithdrawn Status. Terms and definitions relating to inertial sensors are presented. Usage as understood by the inertial sensor community is given... Withdrawn Standard
528-1994 - Inertial Sensor TerminologyTerms and definitions relating to inertial sensors are presented. Usage as understood by the inertial sensor community is given preference over... Superseded Standard
528-2001 - Inertial Sensor TerminologyTerms and definitions relating to inertial sensors are presented in this standard. Usage as understood by the inertial sensor community is given... Active Standard
529-1980 - Supplement for Strapdown Applications to Standard Specification Format Guide and Test Procedure for Single-Degree-of-Freedom Rate-Integrating GyrosThis specification defines the requirements for a single-degree-of-freedom rate-integrating gyro to be used as a strapdown sensor for an inertial... Active Standard
530-1978 - Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Digital, Torque-Balance AccelerometerThis specification defines the requirements and test procedures for a digital accelerometer which utilizes a linear, single-axis, nongyroscopic... Superseded Standard
647-2006 - Standard Specification Format Guide and Test Procedure for Single-Axis Laser GyrosSpecification and test requirements for a single-axis ring laser gyro (RLG) for use as a sensor in attitude control systems, angular displacement... Active Standard
647-1981 - Standard Specification Format Guide and Test Procedure for Single-Axis Laser Gyros Withdrawn Standard
647-1995 - Standard Specification Format Guide and Test Procedure for Single-Axis Laser GyrosThe specification and test requirements for a single-axis laser gyro for use as a sensor in attitude control systems, angular displacement... Superseded Standard
671-1985 - Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and DisplacementA guide is presented for the preparation of a specification and test procedure for an inertial angular sensor that provides a common meeting... Active Standard
686-1990 - Standard Radar DefinitionsThis standard is published for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Withdrawn Standard
686-1997 - Standard Radar DefinitionsDefinitions for the purpose of promoting clarity and consistency in the use of radar terminology are provided. The definitions represent the... Superseded Standard
686-2008 - Standard Radar DefinitionsDefinitions are provided for the purpose of promoting clarity and consistency in the use of radar terminology. The definitions represent the... Active Standard
802-1990 - IEEE Standard: Overview and ArchitectureThis standard provides an overview to the family of IEEE 802 Standards, defines compliance with the family of IEEE 802 Standards, describes the... Superseded Standard
802-2001 - Overview and ArchitectureIEEE Std 802-2001 is the IEEE standard for local and metropolitan area networks. It provides an overview to the family of IEEE 802 standard and... Active Standard
805-1984 - Recommended Practice for System Identification in Nuclear Power Plants and Related FacilitiesThis recommended practice provides a single source of nuclear power plant system descriptions that, along with related recommended practices... Withdrawn Standard
813-1988 - Specification Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned GyrosThis specification defines the requirements for a two-degree-of-freedom dynamically tuned gyro to be used as a sensor in a strapdown, gimballed... Active Standard
836-1991 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersA guide to the conduct and analysis of precision centrifuge tests of linear accelerometers is provided, covering each phase of the tests beginning... Superseded Standard
836-2001 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersThis recommended practice provides a guide to the conduct and analysis of precision centrifuge tests of linear accelerometers, covering each phase... Superseded Standard
836-2009 - Recommended Practice for Precision Centrifuge Testing of Linear AccelerometersThis recommended practice describes the conduct and analysis of precision tests that are to be performed on linear accelerometers using centrifuge... Active Standard
952-1997 - Standard Specification Format Guide and Test Procedure for Single-Axis Interferometric Fiber Optic GyrosSpecification and test requirements for a single-axis interferometric fiber optic gyro ( I FOG) for use as a sensor in attitude control systems,... Active Standard
1293-1998 - Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Non-Gyroscopic AccelerometersThe specification and test requirements for a linear, single-axis, nongyroscopic accelerometer for use in inertial navigation, guidance, and... Active Standard
1293-1998/Cor 1-2008 - Standard Specification Format Guide and Test Procedure for Linear,Single-Axis, Nongyroscopic Accelerometers Corrigendum 1: Changes to Annex K and Annex LCorrigendum to IEEE Std 1293-1998. Specification and test requirements for linear, single-axis, nongyroscopic accelerometers for use as a sensor... Active Standard
1431-2004 - Standard Specification Format Guide and Test Procedure for Coriolis Vibratory GyrosSpecification and test requirements for a single-axis Coriolis vibratory gyro (CVG) for use as a sensor in attitude control systems, angular... Active Standard
1431-2004/Cor 1-2008 - Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros - Corrigendum 1Corrigendum to IEEE Std 1672-2006. http://standards.ieee.org/reading/ieee/updates/errata/1431_Cor1-2008.pdf Active Standard
1554-2005 - Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and AnalysisTest equipment, data acquisition equipment, instrumentation, test facilities, and data analysis techniques used in inertial sensor testing are... Active Standard
1559-2009 - Inertial Systems TerminologyTerms and definitions relating to aided and unaided inertial systems for navigation, guidance, orientation, stabilization, and related... Active Standard
1672-2006 - Ultrawideband Radar DefinitionsThis document organizes and standardizes the terms and definitions used in the field of ultrawideband (UWB) radar. Active Standard
1672-2006/Cor 1-2008 - Ultrawideband Radar Definitions - Corrigendum 1Abstract: The terms and definitions used in the field of ultrawideband radar are organized and standardized in this document. Active Standard
62530-2007 - IEC 62530 Ed. 1 (IEEE Std 1800(TM)-2005): SystemVerilog - Unified Hardware Design, Specification, and Verification LanguageThis standard provides a set of extensions to the IEEE 1364™ Verilog® hardware description language (HDL) to aid in the creation and verification... Active Standard