Inactive-Reserved Standard

IEEE 1174-2000

IEEE Standard Serial Interface for Programmable Instrumentation

A serial, full-duplex, asynchronous, 9-pin data terminal equipment (DTE) communications port for programmable instrumentation that follows ANSI/TIA/EIA-574-1990 and related standards is defined in this standard.

Sponsor Committee
BOG/SCC20 - SCC20 - Test and Diagnosis for Electronic Systems
Learn More About BOG/SCC20 - SCC20 - Test and Diagnosis for Electronic Systems
Status
Inactive-Reserved Standard
PAR Approval
1998-03-19
Board Approval
2000-01-30
History
ANSI Approved:
2000-06-07
Published:
2001-02-14
Reaffirmed:
2009-03-19
Inactivated Date:
2020-03-05

Working Group Details

Society
IEEE SA Board of Governors
Sponsor Committee
BOG/SCC20 - SCC20 - Test and Diagnosis for Electronic Systems
Learn More About BOG/SCC20 - SCC20 - Test and Diagnosis for Electronic Systems
Working Group
ADMIN_8215 - Project Administration_8215
IEEE Program Manager
Christian Orlando
Contact Christian Orlando

Other Activities From This Working Group

Current projects that have been authorized by the IEEE SA Standards Board to develop a standard.


No Active Projects

Standards approved by the IEEE SA Standards Board that are within the 10-year lifecycle.


No Active Standards

These standards have been replaced with a revised version of the standard, or by a compilation of the original active standard and all its existing amendments, corrigenda, and errata.


No Superseded Standards

These standards have been removed from active status through a ballot where the standard is made inactive as a consensus decision of a balloting group.


No Inactive-Withdrawn Standards

These standards are removed from active status through an administrative process for standards that have not undergone a revision process within 10 years.


488.1-2003

IEEE Standard For Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation

This standard applies to interface systems used to interconnect both programmable and nonprogrammable electronic measuring apparatus with other apparatus and accessories necessary to assemble instrumentation systems. It applies to the interface of instrumentation systems, or portions of them, in which the a) Data exchanged among the interconnected apparatus is digital (as distinct from analog); b) Number of devices that may be interconnected by one contiguous bus does not exceed 15; c) Total transmission path lengths over the interconnecting cables does not exceed 20 m; d) Data rate among devices does not exceed 8 000 000 B/s. The basic functional specifications of this standard may be used in digital interface applications that require longer distances, more devices, increased noise immunity, or combinations of these. Different electrical and mechanical specifications may be required (for example, symmetrical circuit configurations, high threshold logic, special connectors, or cable configurations) for these extended applications.

Learn More About 488.1-2003

Subscribe to our Newsletter

Sign up for our monthly newsletter to learn about new developments, including resources, insights and more.