Working Group Icon

Power and Energy Working Groups

Displaying results 1 - 40 of 489
Working Group Name
StatusHelp
Scattering Coefficient Measurement and uncertainty Analysis Vector Network Analyzers (VNAs) are used to measure reflection and transmission coefficients of multi-port networks at radio, microwave and... Active Working Group
LTCC Working Group Standardized definition of terms commonly in the field of electrical networks and filters. Active Working Group
Waveguides for Millimeter and Sub-Millimeter Wavelengths This Working Group (P1785) is developing: "IEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequencies of 110 GHz and... Active Working Group
ESCS - Definitions for Excitation Systems for Synchronous Machines Working Group This standard defines elements and commonly used components in excitation systems and contains definitions for excitation systems applied to... Active Working Group
ESCS - Preparation of Excitation System Specifications Working Group This guide is intended to provide to the specification writer the information to prepare a specification for the purchase of an excitation system.... Active Working Group
ESCS - Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems Working Group This guide includes criteria, definitions, and test objectives for evaluating the dynamic performance of excitation control systems as applied by... Active Working Group
Hydroelectric Power Subcommittee (HPS) The Hydroelectric Power Subcommittee is a subcommittee of the Energy Development and Power Generation Committee of the IEEE Power Engineering... Active Working Group
HPS - Control of Small (100 kVA to 5 MVA)Hydroelectric Power Plants Working Group Description of the electrical control and monitoring requirements for equipment and systems associated with small (100 kVA to 5 MVA) hydroelectric... Active Working Group
HPS - Installation of Vertical Hydraulic Turbine Driven Generators/Motors for Hydroelectric Applications Working Group The procedures for installation described in this guide apply to all types of synchronous generators and generator/motors rated 5 MVA and above to... Active Working Group
HPS - Rehabilitation of Hydroelectric Power Plants Working Group This guide is intended for the hydroelectric power industry to assist hydroelectric power plant owners, operators, and designers in the economic ... Active Working Group
HPS - Application of Turbine Governing Systems for Hydroelectric Generating Units Working Group This guide is intended to complement IEEE Std 125, providing application details and addressing the impact of plant and system features on... Active Working Group
HPS - Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators Working Group The Hydroelectric Power Subcommittee is a subcommittee of the Energy Development and Power Generation Committee of the IEEE Power Engineering... Active Working Group
HPS - Electrical & Control Design of Hydroelectric Water Conveyance Facilities Working Group This guide describes the electrical and control design of water conveyance facilities associated with hydroelectric projects including associated... Active Working Group
HPS - Unique Identification in Hydroelectric Facilities Working Group A unique identification system for hydroelectric facilities that segregates and incorporates plant, unit, system, and component identifiers as a... Active Working Group
HPS - Hydraulic Turbine and Generator Integrally Forged Shaft and Shaft Runout Tolerances Working Group This standard applies to the dimensions for all types of shaft couplings and shaft runout tolerances for hydraulic turbines and generators. Shafts... Active Working Group
International Practices Subcommittee The International Practices Subcommittee (IPSC) is part of the Energy Development and Power Generation Committee of the IEEE Power Engineering... Active Working Group
Generating Renewable Energy through the Application of Plasma Gasification Working Group This recommended practice presents definitions, theory of operation, recommended engineering practices, and guidelines for design, selection,... Active Working Group
Design of Cable and Raceway Systems in Electric Generating Stations Working Group Guidance for the design and installation of cable raceway systems for all types of electric generating facilities is provided. Recommendations,... Active Working Group
Generator SC - Test Procedure for Synchronous Machines - WG#7 This guide was originally published in 1965 and updated in 1995. This working group further updated the document to reflect the state-of-the-art.... Active Working Group
Generator SC - Application of Superconductor Machines - WG#6 IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommittee. Active Working Group
Generator SC - Renewable Energy Machines and Systems - WG#9 IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommittee. Active Working Group
Materials SC - Stator Core Evaluation of Synchronous Machines Supported by the PES Materials Subcommittee Active Working Group
Materials SC - Qualification and Type Tests for Partial Discharge (PD)-Free Electrical Insulation Systems Used in Rotating Electrical Machines Fed from Voltage Converters IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcommittee. Active Working Group
Materials SC - Quality Control Testing of External Discharges on Form-Wound Coils, Roëbel Bars, Vacuum Pressure Impregnated Stator Insulation and Fully Assembled Stator Windings. IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcommittee. Active Working Group
Materials SC - Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcommittee. Active Working Group
Motor SC - Testing Permanent Magnet Machines IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcommittee. Active Working Group
Working Group 10 for Online Monitoring of Large Synchronous Generators The guidelines for online monitoring of large synchronous generators are described in this guide. High-level discussions of each of the proposed... Active Working Group
Separable Connectors Working Group IEEE-1215 Application guide for Separable Connectors Active Working Group
Copper and aluminium cable connectors Working Group Revision of Standard for Solder-Sweated Split Tinned Connectors and reviewing ANSI C119.1 Underground Connector Standard for comments. Active Working Group
Separable Insulated Connector Systems Working Group Revision of IEEE 386-95 Std for Separable Insulated Connectors System for Power Distribution Systems above 600 V Active Working Group
Displaying results 1 - 40 of 489 - all