Project Icon

Power and Energy Working Groups

Power and Energy Working Groups
Status Help
1667 - Working Group for 1667he IEEE 1667 protocol defines a standard protocol for secure authentication and creation of trust between a secure host and a directly a ... active Working Group
2600 - Hardcopy Device and System Security Working GroupThe IEEE 2600 family of standards were developed by the Hardcopy Device and System Security Working Group, and are sponsored by the IEEE ... active Working Group
WG802.1 - Higher Layer LAN Protocols Working GroupThe IEEE 802.1 Working Group is chartered to concern itself with and develop standards and recommended practices in the following areas: ... active Working Group
WG802.22 - Wireless Regional Area Networks Working GroupThe charter of IEEE 802.22, the Working Group on Wireless Regional Area Networks (WRANs), under the PAR approved by the IEEE-SA Standard ... active Working Group
WG802.3 - Ethernet Working GroupThe IEEE 802.3 Working Group develops standards for Ethernet based LANs active Working Group
SCIT1581 - Static Component Interconnection Test Protocol and Architecture Working GroupThere is currently no defined, independent standard for this new test technology. Each vendor is free in the way of implementing test ha ... active Working Group
WG473 - Electromagnetic Site Survey Working GroupStandards and projects under the oversight of the IEEE Electromagnetic Compatibility Society Standards Development Committee (SDCom) active Working Group
739 - Bronze Book Working GroupThe Bronze Book is one of twelve IEEE Color Books specifically developed for practitioners tasked in identifying approved practices to i ... active Working Group
1349 - Motors in Hazardous Locations Working GroupExisting codes and standards contain cautionary notes for open or nonexplosionproof or nonflameproof enclosed motors in Class I, Divisio ... active Working Group
1662 - Power Electronics Working GroupNew concepts and technologies are rapidly emerging in the applications of High Power Electronics in Electrical Power Distribution System ... active Working Group
303 - Division 2 & Zone 2 Aux. DevicesThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
45 - Working Group for Electrical Installations on ShipboardsThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
463 - Working Group for Electrolytic Cell LineThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
515 - Electrical Resistance Heat Tracing for Industrial ApplicationsThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
841 - Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors Working GroupThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
ShorePwr - Electrical Shore-to-Ship Connections WGRecent developments indicate that many ports are going to encourage or require certain vessels to connect to shore power for the duratio ... active Working Group
1668 - Voltage Sag Ride-through Working GroupThis web site has been developed to expedite the dissemination of information to working group members. On this site, you will find a li ... active Working Group
CFAT - Common Functionality and TEDS Working GroupThere are currently three approved and three proposed smart transducer interface standards in the IEEE 1451 family of standards. They al ... active Working Group
762 - Working Group for Electric Generating UnitThe IEEE Distribution Custom Power Task Force is charged with writing IEEE P1409. This will be a document to provide guidelines and perf ... active Working Group
DSAPRAC - Recommended Practices for Distribution System AnalysisMany commercial software products and academic research projects continue to use analysis methods appropriate for transmission systems, ... active Working Group
HPS - WG 125 - HPS - Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators Working GroupThe Hydroelectric Power Subcommittee is a subcommittee of the Energy Development and Power Generation Committee of the IEEE Power Engine ... active Working Group
GEN - WG115 - Generator SC - Test Procedure for Synchronous Machines - WG#7This guide was originally published in 1965 and updated in 1995. This working group further updated the document to reflect the state-of ... active Working Group
GEN - WG1665 - Generator SC - Generator Rewinds - WG#3IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommi ... active Working Group
GEN - WG492 - Generator SC - Operation and Maintenance of Hydro-Generators - WG#5IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommi ... active Working Group
GEN - WG67 - Generator SC - Operation and Maintenance of Turbine GeneratorsIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommi ... active Working Group
GEN - WG8 - Generator SC - Coordination of C50s and IEC - WG#8IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommitte, Materials Subcommittee and Generator Subcommi ... active Working Group
Matl - WG117 - Materials SC - Standard Test Procedure for Evaluation of Systems of Insulating Materials for Random-Wound AC Rotating Electrical MachineryIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG1310 - Materials SC - Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large GeneratorsLarge motor and generator stator windings may suffer from insulation problems caused by frequent and rapid load shifts. A large Working ... active Working Group
Matl - WG1776 - Materials SC - Thermal Evaluation of Insulation SystemsA test procedure (Combination of IEEE Stds. 275-1992 ™ & 429-1994 ™) for comparing two or more insulation systems in accordance ... active Working Group
Matl - WG1799 - Materials SC - Quality Control Testing of External Discharges on Form-Wound Coils, Roëbel Bars, Vacuum Pressure Impregnated Stator Insulation and Fully Assembled Stator Windings.IEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG433 - Materials SC - Insulation Testing of AC Electric Machinery with High Voltage at Very Low FrequencyIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG434 - Materials SC - Functional Evaluation of Insulation Systems for AC Electric MachinesIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG522 - Materials SC - Turn Insulation of Form-Wound Stator CoilsIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG56 - Materials SC - Insulation Maintenance of Electric MachinesIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Matl - WG95 - Materials SC - Insulation Testing of AC Electric Machinery with High Direct VoltageIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Motor - WG112 - Motor SC - Test Procedure for Polyphase Induction Motors and GeneratorsIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Motor - WG1415 - Motor SC - Induction Machinery Maintenance Testing and Failure AnalysisIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Motor - WG252 - Motor SC - Test Procedure for Polyphase Induction MotorsIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Motor - WG620 - Motor SC - Presentation of Thermal Limit Curves for Squirrel CageIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
Motor-WG1812 - Motor SC - Testing Permanent Magnet MachinesIEEE Dielectrics and Electrical Insulation Society is responsible for: Motors Subcommittee, Materials Subcommittee and Generator Subcomm ... active Working Group
WG_1106 - Ni-Cd Installation, Maintenance and Testing Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1115 - Ni-Cd Battery Sizing Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1187 - VRLA Battery Installation Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1189 - VRLA Selection Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1491 - Battery Monitoring Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1578 - Spill Containment Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1635 - Ventilation Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_1657 - Battery Technician Qualification Working GroupAlthough ac and dc electricity follow the same physical laws, there are differences. Training of electricians worldwide is fairly stand ... active Working Group
WG_1660 - Application and Management Battery Cycling Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_484 - Vented Lead-Acid Batteries Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
WG_485 - Vented Lead Acid Sizing Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
A11W/1142 - Moisture Impervious Cables Working GroupThe mission of this working group is to continually stay abreast of technology and materials developments that enhance cable performance ... active Working Group
A13W/P1407 - Working Group for Aging Tests of MV Cables Using Water-Filled TanksTo revise IEEE Std 1407-1998: Guide for Accelerated Aging Tests for Medium-Voltage Extruded Electric Power Cables Using Water-Filled Tanks. active Working Group
B02W/404 - Working Group for Cable JointsThe standard provides manufacturers and users with a consistent set of qualification test requirements for all cable joints rated 2.5 kV ... active Working Group
B09W/P1493 - Guide for the Evaluation of Solvents Used for Cleaning Electrical Cables and AccessoriesThis guide presents evaluation categories, test methods and acceptance criteria to evaluate chemicals used to clean electrical cables an ... active Working Group
B12W/P1511 - WG for Guide for Investigating and Analyzing Shielded Power Cable Failures on Systems Rated 5 kV Through 46 kVTo develop a general overview and suggested working procedures to investigate and analyze cable failures on systems rated 5 kV through 4 ... active Working Group
B16W/386 - Separable Insulated Connector Systems Working GroupRevision of IEEE 386-95 Std for Separable Insulated Connectors System for Power Distribution Systems above 600 V active Working Group
B17W/P1610 - Faulted Circuit Indicator Working Group B17WP495, P1216, and P1610 Guides for the Application of Fault Circuit Indicators active Working Group
B18W/1215 - Separable Connectors Working GroupIEEE-1215 Application guide for Separable Connectors active Working Group
C02W/P575 - Bonding Metallic Shields of Single Conductor Power Cables Rated 69 - 500 kV Working GroupAll issues related to installation, operation and testing of cable systems. active Working Group
C11W/1120 - Submarine Cables Working GroupThis group exchanges information about submarine power cables. Topics include the planning, permitting, design, installation, operation ... active Working Group
C14W/82 - Impulse Voltage Testing Working GroupThis Working Group maintains the Standard for performing lightning impulse testing of high voltage cables, IEEE 82 - Standard Test Proce ... active Working Group
C25W/P442 - Working Group for Guide for Soil Thermal Resistivity Measurements - IEEE 442The purpose of this guide is to provide sufficient information to enable the user to select useful commercial test equipment, or to manu ... active Working Group
D05W_WG/P1185 - Station Cable Installation Criteria Working GroupWG D5W is responsible for the development and maintenance of IEEE 1185, Recommended Practices for Cable Installation at Generating Stati ... active Working Group
D11W/P1143 - Working Group for Shielding Practice for Low Voltage Cables (D11W)Subcommittee D is tasked with cable systems for power, control, signal, data, communication, and fiber optic applications for use in gen ... active Working Group
D15W/1202 - Flame Propagation Testing Working GroupWG D15W is responsible for the maintenance and revision of IEEE 1202, Standard for Flame Propagation Testing of Wire & Cable. The d ... active Working Group
D17W/P1717 - Standard For Testing Circuit Integrity Cables Using the Hydrocarbon Pool Fire Test ProtocolThe Generating Station and Industrial Cables Subcommittee’s mission is to continually advance the understanding and improve the applic ... active Working Group
F02W/P400.1 - Guide for Shielded Power Cable SystemsAdministers standards activities within the ICC: assists the subcommittee with generation, development, revision or reaffirmation of tec ... active Working Group
F07W/1617 - Neutral Corrosion Working GroupTo provide a forum for discussions related to cable neutral corrosion and collect relevant data in order to issue a guide covering contr ... active Working Group
BPL - Broadband over Power Line Working GroupEvaluate and report on the characteristics and performance of Broadband over Power Line (BPL) systems as they are applied and affect the ... active Working Group
D0_1654 - RF Protection of Personnel Working in the Vicinity of Wireless Communications Antennas Attached to Electric Power Line Structures_1654The treatment of all matters related to the engineering in maintenance of lines and associated devices. Research, development, testing, ... active Working Group
P0_C37.238 - IEEE 1588 Profile for Protection ApplicationsReview drafts of PSRC publications for proper terminology, abbreviations, and symbols; and recommend additions and changes to C37.100 (D ... active Working Group
S0/WG1711 - PSCC/S0/WG 1711 & 1711.1Responsible for the trial use standard P1711. active Working Group
S1-WG_1686 - Cybersecurity SubcommitteeSuggestions are made for testing the dielectric strength of the insulation separatxC2xADing the various turns from each other within mul ... active Working Group
SC6 - Wireline SubcommitteeEvaluate and report on the characteristics and performance of single or multipurpose wire line communication systems which serve electri ... active Working Group
SC6-WG - Wireline Working GroupEvaluate and report on the characteristics and performance of single or multipurpose wire line communication systems which serve electri ... active Working Group
C37.235_WG-I7 - Working Group for Rogowski Coils used for Relaying PurposesThis guide establishes criteria and requirements for application of Rogowski coils (RCs) (air-core current sensors) used for protective ... active Working Group
C37.90.1 - WG for PC37.90.1Produce a special report addressing redundancy considerations for relaying. active Working Group
Revise C37.105-1987 - Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating StationsReview the applicability of the standard for all relays used in nuclear power plants, specifically digital relays and seismic qualificat ... active Working Group
HV3.3.11 - 3.3.11 Continuous Revision of C62.11 Standard WGThe SPDC is a technical committee of the IEEE Power & Energy Society (PES). It is the Working Groups (WGs) of the SPDC Subcommittees ... active Working Group
HV3.4.13 - 3.4.13 HV Surge Protection of Generating Plants WGThis group covers surges entering an electric generating plant via transmission and distribution lines and methods to reduce them; metho ... active Working Group
HV3.4.14 - 3.4.14 Continuous Revision of C62.22 Application Guide WGThe SPDC is a technical committee of the IEEE Power & Energy Society (PES). It is the Working Groups (WGs) of the SPDC Subcommittees ... active Working Group
HV3.4.9 - 3.4.9 Application Guide for Surge Voltage Protective Equipment on AC Rotating Machinery WGInvestigate past and present publications and practices in the application of surge voltage protection to AC rotating machinery. Integra ... active Working Group
LV3.6.1 - 3.6.1 LV Gap Type Surge Protective Device Components WGReview available low voltage gap type surge protective device components. Develop and recommend standard methods for testing and rating ... active Working Group
LV3.6.10 - 3.6.10 Surge Protection of Equipment Connected to Both LV AC Power and Communication Circuits WGDevelop a guide for the application of multi-service (multi-port) surge protectors to protect equipment connected to ac power and commun ... active Working Group
LV3.6.2 - 3.6.2 LV Solid State Surge Protective Components WGReview available low voltage solid state surge protective device components.<br />Develop and recommend standard methods for testing and ... active Working Group
LV3.6.3 - 3.6.3 LV Surge Protective Device Components Application Guide WGDevelop a generalized guide for the application of low voltage surge protective device components. Coordinate and incorporate sections p ... active Working Group
LV3.6.6 - 3.6.6 LV AC Power Circuit Protective Devices WGThe area of Low-Voltage Power Surge Protective Devices is rapidly evolving to include new concepts, technologies and applications. Rece ... active Working Group
LV3.6.7 - 3.6.7 LV Data, Communications and Signaling Circuit Surge Protective Devices WGEstablish performance characteristics for surge protective devices packaged to be connected to low voltage communications and signaling ... active Working Group
LV3.6.9 - 3.6.9 Performance Standard for LV Surge-Protective Devices (Secondary Arresters) WGMaintain the performance standard (C62.44) and application guide (C62.34) for surge protective devices designed for application on the l ... active Working Group
SCE0-WGE2 - Containment and Control of Oil Spills in SubstationsResponsible for revising IEEE Std 980 to current state of the art practices. active Working Group
WGC2TF4 - Committee 2 Task Force 4Responsible for the review and update of all assigned ANSI/IEEE and IEEE standards, as needed. The reviews and updates encompass advanc ... active Working Group
WGC3 - Substations Working Group C3Responsible for the review and update of all assigned ANSI/IEEE and IEEE standards, as needed. The reviews and updates encompass advanc ... active Working Group
WGC3_1379 - Recommended Practice for Data Communications Between RTUs & IEDs in a SubstationResponsible for the review and update of all assigned ANSI/IEEE and IEEE standards, as needed. The reviews and updates encompass advanc ... active Working Group
WGC5 - Substations Working Group C5Responsible for the review and update of all assigned ANSI/IEEE and IEEE standards, as needed. The reviews and updates encompass advanc ... active Working Group
WGD1 - IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power SubstationsTo develop guidelines on minimum clearances and insulation coordination of sub­stations. active Working Group
WGD3 - Substation Bus Design Working GroupDetermine basis of design for thermal loading effect of thermal expansions, corona, or radio influence voltage on the design; determine ... active Working Group
WGD5 - IEEE Guide for Direct Lightning Stroke Shielding of SubstationsTo investigate methods being used to prevent direct lightning strokes to bus and equipment within a substation and to prepare a guide fo ... active Working Group
WGD6 - Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System Working GroupProduce an IEEE paper and a recommended practice on how to design flexible interconnections for substation bus-to-bus, bus-to-equipment ... active Working Group
WGD7 - GroundingTo review IEEE 80 on a continuing basis and to direct the reaffirmation or review of the guide every five years. To guide contributions ... active Working Group
WGD8 - Development of Specification for Turnkey Substation ProjectsTo investigate and publish a guide on the methods and procedures for a systematic approach toward the development of a guide for turnkey ... active Working Group
WGD9 - Permanent Connections Used in Substations Working GroupInvestigate the necessary tests or test procedures to evaluate connections for thermal capacity, conductivity, mechanical strength and c ... active Working Group
WGF1 - IEEE Recommended Practices for Seismic Design of SubstationsWithin the scope of the Main Committee, provide guidelines relating to seismic design criteria in substations. active Working Group
WGF3 - Substation Fire Protection Working GroupInvestigate and review current fire protection philosophy, regulations, and practices in use within substations and incorporate this inf ... active Working Group
WGG3_1264 - IEEE Guide for Animal Deterrents for Electric Power Supply SubstationsThe Subcommittee is currently forming a working group. active Working Group
WGI4 - Static Var CompensatorInvestigate substation design for, and operation of, Static Var Compensators (SVCs), including valve cooling and enclosures, layouts, au ... active Working Group
WGI5 - Voltage Sourced ConvertersReview the applications of voltage sourced converters (VSC), such as STATCOM, UPFC, SSSC and VSI for DC transmission. Coordinate with ot ... active Working Group
WGI8 - Power Electronics Building Blocks (PEBB) Concept Working GroupPower Electronics Building Block is a broad concept that incorporates individually or collectively progressive integration of power devi ... active Working Group
WGK1 - High Voltage Gas-Insulated SubstationsThis standard establishes ratings and requirements for planning, deesign, testing, installation, and operation of gas insulated substati ... active Working Group
Adscom-WG_C37.100 - Adscom - IEEE Standard Definitions for Power SwitchgearReview drafts of PSRC publications for proper terminology, abbreviations, and symbols; and recommend additions and changes to C37.100 (D ... active Working Group
HVCB-WG-C37.06.1 - HVCB-C37.06.1Treatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.013 - HVCB - IEEE Standard for AC High-Voltage (rated above 1000 V) Generator Circuit Breakers for Use with Generators Rated 10 MVA or MoreTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.015 - HVCB - IEEE Application Guide for Shunt Reactor SwitchingShunt reactors are used in power systems to compensate the capacitive losses of transmission lines during periods of low load. The shunt ... active Working Group
HVCB-WG_C37.016 - HVCB - IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kVTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.017 - HVCB-WG_C37.017Currently In North America the only IEEE standard available for bushings is for oil filled bushings used on power transformers, but none ... active Working Group
HVCB-WG_C37.04-corr - HVCB-C37.04corrigendumThe latest revision to the Standard for Shunt Capacitors is IEEE 18-2002. This standard applies to capacitors rated 216 V or higher, 2.5 ... active Working Group
HVCB-WG_C37.04a - HVCB - Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis: Amendment 1 Capacitance Current SwitchingTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.04b - HVCB - TRV Working GroupTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.06 - HVCB - High Voltage Circuit Breaker Subcommittee-C37.06This IEEE Std C37.06-2009, identifies preferred ratings of circuit breakers and does not exclude use of circuit-breaker characteristics ... active Working Group
HVCB-WG_C37.081a - HVCB - Supplement to IEEE Guide for Synthetic Fault Testing of AC High Voltage Circuit Breakers Rated on a Symmetrical Current BasisTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.09 - HVCB - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current BasisTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.09-1999Cor1 - HVCB - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1Treatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVCB-WG_C37.11 - HVCB - IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current BasisTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVS-WG_1247 - HVS - IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 VoltsTreatment of all matters relating to switches above 1500 volts AC and 3000V dc active Working Group
HVS-WG_C37.30.2 - HVS - Guide for Wind Loading Evaluation of High Voltage (>1000 V) Air Break SwitchesHigh Voltage Air Switches are intended to operate under usual operating conditions unless otherwise specified. This includes winds up t ... active Working Group
LVSD-WG_C37.13 - LVSD - IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in EnclosuresTreatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
LVSD-WG_C37.13.1 - LVSD - Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker SwitchgearSeveral incidents in industry indicated that switching devices (switching devices utilizing contactors) were being improperly designed, ... active Working Group
LVSD-WG_C37.17 - LVSD - Standard for Direct-Acting Trip Systems for Low-Voltage (up to 635 V) AC and General Purpose Low Voltage (up to 325 V) DC Power Circuit BreakersTreatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
LVSD-WG_C37.18 - LVSD - IEEE Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric MachineryTreatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
LVSD-WG_C37.26 - LVSD - IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage Inductive Test CircuitsTreatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
LVSD-WG_C37.27 - LVSD - IEEE Standard Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuit Breakers (Using Separately Mounted Current-Limiting Fuses)Treatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
LVSD-WG_PC37.14 - LVSD - Joint LVSD-VT Task Force (IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures)Treatment of all matters relating to low voltage devices (1000 volts ac, 3200 volts dc and below), such as low voltage power circuit bre ... active Working Group
RODE-WG_C37.60 - RODE - Reclosers and Other Distribution Equipment Subcommittee - C37.60Treatment of all matters relating to distribution switching and overcurrent protective equipment, including reclosers, sectionalizers, f ... active Working Group
RODE-WG_C37.63 - RODE - IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC SystemsTreatment of all matters relating to distribution switching and overcurrent protective equipment, including reclosers, sectionalizers, f ... active Working Group
RODE-WG_C37.66 - RODE - IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)Treatment of all matters relating to distribution switching and overcurrent protective equipment, including reclosers, sectionalizers, f ... active Working Group
RODE-WG_C37.68 - RODE - Guide for the Application of Electronic Controls to Pole Mounted and Padmounted SwitchgearTreatment of all matters relating to distribution switching and overcurrent protective equipment, including reclosers, sectionalizers, f ... active Working Group
RODE-WG_C37.74 - RODE - IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kVTreatment of all matters relating to distribution switching and overcurrent protective equipment, including reclosers, sectionalizers, f ... active Working Group
SASC-WG_C37.121 - SASC - American National Standard for Switchgear - Unit Substations - RequirementsThis document is intended for use as the basis for the coordination of equipment in Unit Substations by assisting in the selection of co ... active Working Group
SASC-WG_C37.20.2 - SASC - IEEE Standard for Metal-Clad SwitchgearTreatment of all matters relating to Switchgear Assemblies. active Working Group
SASC-WG_C37.20.3 - SASC - IEEE Standard for Metal-Enclosed Interrupter SwitchgearTreatment of all matters relating to Switchgear Assemblies. active Working Group
SASC-WG_C37.20.4 - SASC - MEI Switchgear & Switch Working GroupTreatment of all matters relating to Switchgear Assemblies. active Working Group
SASC-WG_C37.20.7 - SASC - IEEE Working Group Arc Fault TestingTreatment of all matters relating to Switchgear Assemblies. active Working Group
SASC-WG_C37.21 - SASC - IEEE Standard for Control SwitchboardsTreatment of all matters relating to Switchgear Assemblies. active Working Group
SASC-WG_C37.23 - SASC - IEEE Standard for Metal-Enclosed BusTreatment of all matters relating to Switchgear Assemblies. active Working Group
Capacitor-1036 - Working Group for the Application of Shunt Power CapacitorsTreatment of all shunt and series capacitor matters related to economics, technical design, theoretical and experimental performance, in ... active Working Group
Capacitor-P18 - Shunt Capacitor Working GroupThis standard applies to capacitors rated 216 V or higher, 2.5 kvar or more, and designed for shunt connection to ac transmission and di ... active Working Group
Dist-1366 - Distribution Reliability Working GroupTreatment, consideration, and advancement of design concepts and philosophies as they apply to overhead and underground distribution sys ... active Working Group
Dist-1695 - Stray and Contact Voltage Working GroupThere is presently no industry wide guide or standard that describes the variety of publicly and privately accessible voltages resulting ... active Working Group
ESMOL-1048 - Protective Grounding of Power Lines Working GroupThe treatment of all matters related to the engineering in maintenance of lines and associated devices. Research, development, testing, ... active Working Group
ESMOL-1067 - IEEE Guide for In-Service Use, Care, Maintenance, and Testing of Conductive Clothing for Use on Voltages up to 765 kV ac and 750 kV dcThe treatment of all matters related to the engineering in maintenance of lines and associated devices. Research, development, testing, ... active Working Group
PQ-1250 - Voltage Quality Working GroupSpecifically, the VQWG maintains and updates the IEEE 1250 Guide. It is also a forum for thoughtful discussion and action about voltage ... active Working Group
PQ-1453 - Light Flicker Working GroupTreatment of all matters related to the design, theoretical and experimental performance, installation, and service operation of parts o ... active Working Group
TPC-15.11.03 - Construction of Overhead Lines Working GroupInvestigate, evaluate and report on methods, equipment and tools that have been found practical for assembly and erection of structures, ... active Working Group
TPC-Corona - Corona and Field EffectsThe scope of the Corona and Field Effects Working Group is: Analysis and calculation of corona on conductors, structures and hardware. ... active Working Group
Bushing-WGC57.19.00 - Bushing - Gen. Req. of Bushings Working GroupStudy and review engineering aspects of outdoor apparatus bushings having BIL of 110 KV or above and used as components of power transfo ... active Working Group
Bushing-WGC57.19.01 - Bushing - Performance Characteristics Working GroupStudy and review engineering aspects of outdoor apparatus bushings having BIL of 110 KV or above and used as components of power transfo ... active Working Group
Bushing-WGC57.19.03 - Bushing - Req. & Testing of DC Bushings Working GroupStudy and review engineering aspects of outdoor apparatus bushings having BIL of 110 KV or above and used as components of power transfo ... active Working Group
Bushing-WGC57.19.100 - Bushing - Bushing App. Guide Working GroupStudy and review engineering aspects of outdoor apparatus bushings having BIL of 110 KV or above and used as components of power transfo ... active Working Group
Dielectric-WG-C57.138 - Dielectric Tests - Rev. routine impulse test for distribution transformersStudy and review engineering aspects of test voltage requirements for service conditions, or conversely, voltage tests that will determi ... active Working Group
Dielectric-WGC57.113 - Dielectric Tests - TF on PD Measurement Working GroupStudy and review engineering aspects of test voltage requirements for service conditions, or conversely, voltage tests that will determi ... active Working Group
Dielectric-WGC57.98 - Dielectric Tests - Guide for Impulse testsStudy and review engineering aspects of test voltage requirements for service conditions, or conversely, voltage tests that will determi ... active Working Group
Dist-WGC57.12.20 - Distribution - OH Dist. Xfrmers Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.28 - Distribution - Eqp. Encl. Integrity - Pad Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.29 - Distribution - Encl Integrity - Pad Mtd Coastal Env Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.31 - Distribution - Encl Integrity - Pole Mtd. Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.32 - Distribution - Encl Integrity - Subm. Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.34 - Distribution - Req for 3-F Pad Mount Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.35 - Distribution - Bar Coding Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.12.38 - Distribution - Pad-Mount 1 Self Cool <=250kVA Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
Dist-WGC57.15 - Distribution - Step-Voltage Regulator Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
DryType-WGC57.12.01 - Dry Type Transformers - General Req. Working GroupStudy and review engineering aspects of those transformers and reactors in which a significant component of the internal insulation is a ... active Working Group
DryType-WGC57.12.60 - Dry Type Transformers - Thermal Eval. For Solid-Cast & Resin Encap Insulation Working GroupThis Test Procedure for the thermal evaluation of insulation systems of dry type power and distribution transformers, including both ope ... active Working Group
InsFluid-WGC57.121 - Insulating Fluids - Less-Flammable Hydro-Carbon Fluid Working GroupThere is currently no defined, independent standard for this new test technology. Each vendor is free in the way of implementing test ha ... active Working Group
InsFluid-WGC57.139 - Insulating Fluids - DGA in LTC Working GroupThis guide discusses and recommends methods of testing and evaluating dissolved gases in mineral based transformer oils found in Load Ta ... active Working Group
InsLife-WGC57.100 - Insulating Life - Thermal Eval. of Dist. Xfrmrs Working GroupThis standard provides test procedures to evaluate the thermal aging characteristics of insulation systems used in liquid-immersed distr ... active Working Group
PerfCharac-WGC57.105 - Performance Characteristics - Transformer Connections in Three-Phase Dist Systems Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.109 - Performance Cahracteristics - Liquid-Immersed Transformers Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.110 - Performance Characteristics - Non-Sinusoidal Load Current Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.120 - Performance Characteristics - Loss Evaluation Guide Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.123 - Performance Characteristics - Xfrmr Loss Measurement Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.142 - Performance Characteristics - Mitigation of Switching Transients CB/Xfrmr Interaction Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.149 - Performance Characteristics - FRA Guide Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.18.10 - Performance Characteristics - Semicon Rectifier Xfrmrs Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.21 - Performance Characteristics - Req & Test Code for Shunt Reactors >500kVA Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PerfCharac-WGC57.32 - Performance Characteristics - Neutral Grounding Devices Working GroupStudy and review the treatment of loss, impedance, exciting current, inrush current and other performance characteristics and their meth ... active Working Group
PwrTrans-WGC57.12.10 - Power Transformers - Req. for Liq. Imm. Power Xfrmrs Working GroupStudy and review power transformers and reactors with particular attention to service requirements of installations in the western Unite ... active Working Group
PwrTrans-WGC57.135 - Power Transformers - Phase-Shift Xfrmrs Working GroupStudy and review power transformers and reactors with particular attention to service requirements of installations in the western Unite ... active Working Group
PwrTrans-WGC57.148 - Power Transformers - Std for Control Cabinet Working GroupStudy and review power transformers and reactors with particular attention to service requirements of installations in the western Unite ... active Working Group
PwrTrans-WGC57.150 - Power Transformers - Transportation of Large Power Working GroupStudy and review power transformers and reactors with particular attention to service requirements of installations in the western Unite ... active Working Group
PwrTrans-WGC57.153 - Power Transformers - Transformer Paralleling WGStudy and review power transformers and reactors with particular attention to service requirements of installations in the western Unite ... active Working Group
UG-WGC57.12.23 - Underground TR & NW Protect - UG Self-Cont 1-0 Working GroupThis standard covers certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety feature ... active Working Group
UG-WGC57.12.24 - Underground TR & NW Protect - UG 3-0 Dist Xfmr <=2500kVA Working GroupStudy and review the engineering aspects of secondary network protectors and secondary network transformers (liquid filled and dry-type) ... active Working Group
UG-WGC57.12.40 - Underground TR & NW Protect - Std. Req. for Sec. Network Xfrmrs Working GroupStudy and review the engineering aspects of secondary network protectors and secondary network transformers (liquid filled and dry-type) ... active Working Group
UG-WGC57.12.44 - Underground TR & NW Protect - Std. Req. for Sec. Network Protectors Working GroupStudy and review the engineering aspects of secondary network protectors and secondary network transformers (liquid filled and dry-type) ... active Working Group
TAD - Test and ATS Description Working GroupOur subcommittee was formerly known as the ATLAS subcommittee because our primary activity was concerned with the development of ATLAS s ... active Working Group
1547.2WG - DR Interconnection Application Guide Procedures Working GroupThis document facilitates the use of IEEE 1547 by characterizing the various forms of distributed resource technologies and the associat ... active Working Group
1547.4WG - DR Island Systems Working GroupThis guide is intended to be used by EPS designers, operators, system integrators, and equipment manufacturers. The document is intended ... active Working Group
1547.6WG - Distributed Resources Interconnected with Distribution Secondary Networks Working GroupThis standard focuses on the technical issues associated with the interconnection of Area EPS distribution secondary networks with a Loc ... active Working Group
2030WG - IEEE 2030 Smart Grid Interoperability Working GroupWelcome to the P2030 Work Group (WG) site. The purpose of this site is to facilitate development of the P2030 standard while providing e ... active Working Group
DRIS WG - P1547.7 Distributed Resources Impact Studies Working GroupThe creation of IEEE Std 1547 IEEE Standard for Interconnecting Distributed Resources with Electric Power Systemshas led to the increase ... active Working Group
ESS - Working Group for Energy Storage SubsystemsSCC21 Oversees the development of standards in the areas of Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage, and coo ... active Working Group
1609 - Dedicated Short Range Communication Working GroupThe IEEE 1609 Family of Standards for Wireless Access in Vehicular Environments (WAVE) define an architecture and a complementary, stand ... active Working Group