Project Icon

Instrumentation and Measurement Working Groups

Instrumentation and Measurement Working Groups
Status Help
1149.4WG - Mixed-Signal Test Bus Working GroupTo define, document, and promote the use of a standard mixed-signal test bus that can be used at the device, sub-assembly, and system le ... active Working Group
1450.6.2WG - Working Group for Core Test Language (CTL)A language to describes test constructs such as test patterns, different configurations of a design etc. is defined to allow for reuse t ... active Working Group
1450.6WG - Working Group for Core Test Language (CTL)To develop a language which will provide a sufficient description of a core to support reuse of test data developed for that core after ... active Working Group
515 - Electrical Resistance Heat Tracing for Industrial ApplicationsThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
1505 - Hardware Interfaces Working GroupThe Hardware Interfaces (HI) Sub-committee manages the IEEE-1505 RFI and the associated Pin Map (IEEE-1505.1 CTI) standards. The 1505 R ... active Working Group
SCMUA - Scattering Coefficient Measurement and uncertainty AnalysisVector Network Analyzers (VNAs) are used to measure reflection and transmission coefficients of multi-port networks at radio, microwave ... active Working Group
CFAT - Common Functionality and TEDS Working GroupThere are currently three approved and three proposed smart transducer interface standards in the IEEE 1451 family of standards. They al ... active Working Group
MMC - Mixed-mode Communication Working GroupA standard is needed that allows analog transducers to communicate digital information for the purposes of self-identification and confi ... active Working Group
PNCS - Precise Networked Clock Synchronization Working GroupThe IEEE 1588 working group is charged with the maintenance and any future revisions of the IEEE 1588 Standard for a Precision Clock Syn ... active Working Group
WS - Wireless Sensor Working GroupMany companies are developing various wireless communication interfaces and protocols for sensors. An openly defined wireless transducer ... active Working Group
Probe - Subcommittee on Probe StandardsSCOPS is currently in the process of developing a standard for test methods and transfer (artifact) standards that will be used to chara ... active Working Group
SCOPT - Transitions, Pulses, and Related Waveforms Working GroupThe Subcommittee on Pulse Techniques (SCOPT) works under the Instrumentation and Measurement Society Technical Committee TC-10, Waveform ... active Working Group
WRSC - Waveform Recorder SubcommitteeThis working group is part of the Waveform Generation, Measurement and Analysis Technical Committee (TC-10) of the IEEE Instrumentation ... active Working Group
TPC-Corona - Corona and Field EffectsThe scope of the Corona and Field Effects Working Group is: Analysis and calculation of corona on conductors, structures and hardware. ... active Working Group
DMC - Diagnostic and Maintenance Control Working GroupTo provide formal specifications to support exchange and analysis of information in system test and diagnosis. active Working Group
HI - Hardware Interfaces Working GroupThe Hardware Interfaces (HI) Sub-committee manages the IEEE-1505 RFI and the associated Pin Map (IEEE-1505.1 CTI) standards. The 1505 R ... active Working Group
TAD - Test and ATS Description Working GroupOur subcommittee was formerly known as the ATLAS subcommittee because our primary activity was concerned with the development of ATLAS s ... active Working Group
TC95_SC1 - Techniques, Procedures, Instrumentation and Computation Working GroupSubcommittee 1 is responsible for the development of standards for the assessment of human exposure to electric, magnetic and electromag ... active Working Group