Project Icon

Industry Applications Working Groups

Industry Applications Working Groups
Status Help
1850 - Property Specification Language Working GroupThe Accellera Property Specification Language (PSL), a language for formal specification of electronic system behavior, was developed by ... active Working Group
IP Encryption - Working Group for Design Intellectual Property (IP) Encryption and Rights ManagementThe intent of this document is to enable design flows that provide interoperability between IP sources, tools, integrators, and users of ... active Working Group
OMF - Open Model Forum Working GroupTo provide a standard method for interfacing and managing complex electronic models to design automation tools. This method is aimed at ... active Working Group
P1076 - VHDL Analysis and Standardization GroupVASG is responsible for maintaining and extending the VHDL standard (IEEE 1076). Current News: 1076-2008 was approved by REVCOM in Septe ... active Working Group
SystemC - System C Standardization Working GroupThe general charter of this project is to provide a C++-based standard for designers and architects who need to address complex systems ... active Working Group
WG1481R - Integrated Circuit (IC) Open Library Architecture (OLA) Working GroupThe IEEE1481 Reflector Archives contain workgroup Minutes and shared documents for the workgroup. The archives dates from 2002 to the pr ... active Working Group
eWG - Functional Verification Language e Working GroupThe e functional verification language is an application-specific programming language, aimed at automating the task of verifying a hard ... active Working Group
WG802.1 - Higher Layer LAN Protocols Working GroupThe IEEE 802.1 Working Group is chartered to concern itself with and develop standards and recommended practices in the following areas: ... active Working Group
739 - Bronze Book Working GroupThe Bronze Book is one of twelve IEEE Color Books specifically developed for practitioners tasked in identifying approved practices to i ... active Working Group
1349 - Motors in Hazardous Locations Working GroupExisting codes and standards contain cautionary notes for open or nonexplosionproof or nonflameproof enclosed motors in Class I, Divisio ... active Working Group
303 - Division 2 & Zone 2 Aux. DevicesThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
45 - Working Group for Electrical Installations on ShipboardsThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
841 - Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors Working GroupThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
WG_1660 - Application and Management Battery Cycling Working GroupThe PES Stationary Battery Committee is dedicated to the advancement of user knowledge in the application and operation of all stationar ... active Working Group
SC6-WG - Wireline Working GroupEvaluate and report on the characteristics and performance of single or multipurpose wire line communication systems which serve electri ... active Working Group
LV3.6.6 - 3.6.6 LV AC Power Circuit Protective Devices WGThe area of Low-Voltage Power Surge Protective Devices is rapidly evolving to include new concepts, technologies and applications. Rece ... active Working Group
WGD5 - IEEE Guide for Direct Lightning Stroke Shielding of SubstationsTo investigate methods being used to prevent direct lightning strokes to bus and equipment within a substation and to prepare a guide fo ... active Working Group
HVCB-WG_C37.017 - HVCB-WG_C37.017Currently In North America the only IEEE standard available for bushings is for oil filled bushings used on power transformers, but none ... active Working Group
HI - Hardware Interfaces Working GroupThe Hardware Interfaces (HI) Sub-committee manages the IEEE-1505 RFI and the associated Pin Map (IEEE-1505.1 CTI) standards. The 1505 R ... active Working Group
TC34_SC2 - SAR evaluation - numerical techniquesThe purpose of TC34 Subcommittee 2 is to specify numerical techniques and standardized models of the human anatomy used for determining ... active Working Group
TC95_SC2 - Terminology, Units of Measurements and Hazard Communications Working GroupSubcommittee 2 is responsible for the development of standards for the design of symbols denoting the incidence of radio-frequency (RF) ... active Working Group
TC95_SC5 - Working Group for Safety Levels with Respect to Electro-Explosive DevicesSubcommittee 5 is responsible for the development of standards that provide techniques for determining safe distances from radio frequen ... active Working Group