Project Icon

Electromagnetic Compatibility Working Groups

Electromagnetic Compatibility Working Groups
Status Help
1720 - Near-Field Antenna MeasurementsThere is currently no set of recommended practices for near-field measurements. A document of recommended practices would be an invaluab ... active Working Group
1667 - Working Group for 1667he IEEE 1667 protocol defines a standard protocol for secure authentication and creation of trust between a secure host and a directly a ... active Working Group
WG802.1 - Higher Layer LAN Protocols Working GroupThe IEEE 802.1 Working Group is chartered to concern itself with and develop standards and recommended practices in the following areas: ... active Working Group
SCIT1581 - Static Component Interconnection Test Protocol and Architecture Working GroupThere is currently no defined, independent standard for this new test technology. Each vendor is free in the way of implementing test ha ... active Working Group
DYSPAN-1900.1WG - DYSPAN - Terms, Definitions and Concepts for Spectrum Management Working GroupNew concepts and technologies are rapidly emerging in the fields of spectrum management, policy-defined radio, adaptive radio, software- ... active Working Group
DYSPAN-1900.2WG - In-Band, Adjacent Band Interference and Coexistence Working GroupNew concepts and technologies are rapidly emerging in the fields of spectrum management, policy-defined radio, adaptive radio, and softw ... active Working Group
DYSPAN-P1900.4 - Architecture and Enablers for Optimised Radio & Spectrum resource usageThe purpose of 1900.4 is to address radio resource management, reconfiguration management in composite wireless networks comprising mult ... active Working Group
CEM_1597 - Computational Electromagnetics Working GroupThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG1128 - RF Absorber Performance Working GroupThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG1140 - Electric and Magnetic Fields from Video Display Terminals Working GroupThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG1302 - Working Group for Electromagnetic Characterization of Conductive GasketsThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG1309 - Working Group for Electromagnetic Field Sensors and ProbesThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG299 - Working Group for Electromagnetic Shielding EnclosuresThe IEEE EMC Society Standards Development Committee is responsible for guiding the development of IEEE EMC Standards. The IEEE EMC Soci ... active Working Group
WG473 - Electromagnetic Site Survey Working GroupStandards and projects under the oversight of the IEEE Electromagnetic Compatibility Society Standards Development Committee (SDCom) active Working Group
463 - Working Group for Electrolytic Cell LineThe Standards Subcommittee offers an opportunity to keep abreast of what is happening in standards both in IEEE and in other worldwide s ... active Working Group
WMSMW - Waveguides for Millimeter and Sub-Millimeter WavelengthsThis Working Group (P1785) is developing: xE2x80x9CIEEE Standard for Rectangular Metallic Waveguides and Their Interfaces for Frequenci ... active Working Group
B02W/404 - Working Group for Cable JointsThe standard provides manufacturers and users with a consistent set of qualification test requirements for all cable joints rated 2.5 kV ... active Working Group
C11W/1120 - Submarine Cables Working GroupThis group exchanges information about submarine power cables. Topics include the planning, permitting, design, installation, operation ... active Working Group
HV3.4.9 - 3.4.9 Application Guide for Surge Voltage Protective Equipment on AC Rotating Machinery WGInvestigate past and present publications and practices in the application of surge voltage protection to AC rotating machinery. Integra ... active Working Group
HVCB-WG_C37.09 - HVCB - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current BasisTreatment of all matters relating to high voltage power circuit breakers (above 1000 Volts AC and 3200 Volts DC). active Working Group
HVS-WG_1247 - HVS - IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 VoltsTreatment of all matters relating to switches above 1500 volts AC and 3000V dc active Working Group
PQ-1453 - Light Flicker Working GroupTreatment of all matters related to the design, theoretical and experimental performance, installation, and service operation of parts o ... active Working Group
Dist-WGC57.12.20 - Distribution - OH Dist. Xfrmers Working GroupStudy and review engineering aspects of overhead, pad mounted and certain underground type distribution transformers rated 2500 kVA and ... active Working Group
TC34_SC1 - SAR evaluation - measurement techniquesThe scope of Subcommittee 1 covers a variety of devices. It initially focused on a recommended practice devoted exclusively to handsets ... active Working Group
TC34_SC2 - SAR evaluation - numerical techniquesThe purpose of TC34 Subcommittee 2 is to specify numerical techniques and standardized models of the human anatomy used for determining ... active Working Group
TC95_SC1 - Techniques, Procedures, Instrumentation and Computation Working GroupSubcommittee 1 is responsible for the development of standards for the assessment of human exposure to electric, magnetic and electromag ... active Working Group
TC95_SC2 - Terminology, Units of Measurements and Hazard Communications Working GroupSubcommittee 2 is responsible for the development of standards for the design of symbols denoting the incidence of radio-frequency (RF) ... active Working Group
TC95_SC3 0-3kHz - Safety Levels with Respect to Human Exposure, 0-3 kHz Working GroupDevelopment of standards for the safe use of electromagnetic energy in the range of 0 Hz to 300 GHz relative to the potential hazards of ... active Working Group
TC95_SC5 - Working Group for Safety Levels with Respect to Electro-Explosive DevicesSubcommittee 5 is responsible for the development of standards that provide techniques for determining safe distances from radio frequen ... active Working Group