Show:
P730 - Software Quality Assurance Processes The activities described in this standard are intended to enable the software project to use the software quality assurance processes to produce... 
P802.3bj - Ethernet Amendment: Physical Layer Specifications and Management Parameters for 100 Gb/s Operation Over Backplanes and Copper Cables This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... 
P802.3bk - Draft Ethernet Amendment 1: Physical Layer Specifications and Management Parameters for Extended Ethernet Passive Optical Networks The purpose of this project is to extend the optical loss budgets supported by Ethernet Passive Optical Networks to support higher density and... 
P802.3bm - Ethernet Amendment: Physical Layer Specifications and Management Parameters for 40 Gb/s and 100 Gb/s Operation Over Fiber Optic Cables This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... 
P802.3bn - Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: Physical Layer Specifications and Management Parameters for Ethernet Passive Optical Networks Protocol over Coax This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses... 
P802.11 - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... 
P802.11af - Draft Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: TV White Spaces Operation The purpose of this amendment is to allow 802.11 wireless networks to be used in the TV white space. 
P802.11ah - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Sub 1 GHz License-Exempt Operation The purpose of this amendment defines operation of license-exempt IEEE 802.11 wireless networks in frequency bands below 1 GHz excluding the TV... 
P802.11ai - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Amendment- Fast Initial Link Setup This amendment defines mechanisms that provide IEEE 802.11 networks with fast initial link set-up methods which do not degrade the security... 
P802.11aj - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: Enhancements for Very High Throughput to support Chinese millimeter wave frequency bands. The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... 
P802.11ak - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Enhancements For Transit Links Within Bridged Networks The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... 
P802.11aq - Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment: Pre-Association Discovery The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also... 
P802.15.4 - Approved Draft Part 15.4: Low-Rate Wireless Personal Area Networks (WPANs) The standard provides for ultra low complexity, ultra low cost, ultra low power consumption and low data rate wireless connectivity among... 
P802.19.1 - Specific Requirements - Part 19: TV White Space Coexistence Methods The purpose of the standard is to enable the family of IEEE 802 Wireless Standards to most effectively use TV White Space by providing standard... 
P802.22.1 - Specific requirements Part 22.1: Standard to Enable Spectrum Sharing using Advanced Beaconing This standard proposes an advanced beaconing specification to facilitate spectrum sharing. The beacon contains information about the system that... 
P802.22a - Wireless Regional Area Networks (WRAN)--Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands Amendment: Management and Control Plane Interfaces and Procedures and enhancement to the Management Information Base (MIB) The purpose of this project is to enhance the definition of managed objects to enable efficient control and management of IEEE 802.22 devices... 
P802.22b - Wireless Regional Area Networks (WRAN)--Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands Amendment: Enhancement for Broadband Services and Monitoring Applications The purpose of this amendment is to enhance the MAC and define an alternate PHY to accommodate broadband extensions and monitoring use cases for... 
P802 - Draft Overview and Architecture This standard serves as the foundation for the family of IEEE 802 Standards published by IEEE for Local Area Networks (LANs), Metropolitan Area... 
P1009 - the Archstie Programming Language This standard defines the Archstie programming language, which supports parallel operation and soft real-time programming. This standard defines... 
P1012 - System, Software and Hardware Verification and Validation The purpose of the standard is to perform the following: - Establish a common framework of the V&V processes, activities, and tasks in support... 
P1062 - Recommended Practice for Software Acquisition This recommended practice is designed to help organizations and individuals incorporate quality, including security, considerations during the... 
P1175.5 - Computer-Aided Software Engineering (CASE) Tool Interconnections -- Reference Data Metamodel for System Behavior Specifications While the conceptual metamodel in IEEE Std 1175.4 provides a basis for thinking and talking about the behavior of a system in terms of black-box... 
P1484.13.3 - Recommended Practice for Learning Technology - ISO 21000-2:2005 Information Technology -- Multimedia Framework (MPEG-21) -- Part 2: Digital Item Declaration Mapping to the Conceptual Model for Resource Aggregation The mapping specified in this Recommended Practice may be used with the mappings of other resource aggregation formats to achieve interoperability... 
P1723 - a Service-Oriented Architecture (SOA) Reference Architecture This standard defines a reference architecture specification which includes the guidance necessary for the development of a SOA. It provides a... 
P1805 - Guide for Requirements Capture Language (RCL) The purpose of this guide is to: - Define a new language, RCL, for the IT Requirements capture. - Enable auto sizing of requirements after the... 
P1828 - Systems with Virtual Components The purpose of this standard is to promote a common basis for leverage (software and data reuse) sharing of concepts and work products among... 
P2030.1 - Guide for Electric-Sourced Transportation Infrastructure This guideline provides methods that can be utilized by utilities, manufacturers, transportation providers, infrastructure developers and end... 
P2030.4 - Guide for Control and Automation Installations Applied to the Electric Power Infrastructure Because components of Smart Grid will be acquired and developed by many different parties, the control and automation systems should be developed... 
P12207 - Systems and software engineering -- Software life cycle processes The purpose of this International Standard is to provide a defined set of processes to facilitate communication among acquirers, suppliers and... 
P15288 - Systems and software engineering -- System life cycle processes The purpose of this International Standard is to provide a defined set of processes to facilitate communication among acquirers, suppliers and... 
P21451-001 - Recommended Practice for Signal Treatment Applied to Smart Transducers The purpose is to define a standardized and universal framework that allows smart transducers to extract features of the signal being generated... 
P21451-1 - Smart Transducer Interface for Sensors and Actuators - Common Network Services In the family of IEEE 1451 standards, there are no common network services defined for IEEE 1451 smart transducers to communicate transducer data... 
P23026 - Systems and software engineering - Engineering and management of websites for systems, software, and services information This International Standard (IS) defines system engineering and management requirements for the life cycle of websites including strategy, design,... 
P24748-4 - Systems and Software Engineering -- Life Cycle Management -- Part 4: Systems Engineering Planning [ISO/IEC standards generally do not include a distinct statement of purpose.] 
P24748-5 - Systems and Software Engineering--Life Cycle Management--Part 5: Software Development Planning This International Standard specifies the required processes to be implemented for the technical planning of a software development effort within... 
P26511 - Draft Software and systems engineering -- Requirements for managers of user documentation will not contain a purpose statement 
P26515 - Draft Software and systems engineering -- Developing user documentation in an agile environment document will not contain a purpose statement 
P29119-1 - Draft Software and Systems Engineering--Software Testing--Part 1: Concepts and Definitions The scope of this standard is the testing of software-intensive systems. Software is present in many of the products we use today and these... 
P29119-2 - Software and systems engineering - Software testing - Part 2: Test process This part of ISO/IEC/IEEE 29119 specifies test processes that can be used to govern, manage and implement software testing for any organization,... 
P29119-3 - Draft Software and Systems Engineering--Software Testing--Part 3: Test Documentation This standard covers software test documentation templates and content for use by any organization and/or project. It defines the use and contents... 