Project Icon

Instrumentation and Measurement Projects

Displaying results 1 - 40 of 116
Project Name
StatusHelp
P45.6 - Draft Recommended Practice for Electrical Installations on Shipboard - Electrical Testing Provides a consensus of recommended practices for system testing in marine electrical engineering as applied specifically to vessels, shipboard... Active Project
P48 - Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV This standard provides test procedures and requirements for all indoor and outdoor cable terminations used on alternating-current shielded cables... Active Project
P99 - Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment This recommended practice provides a general format for the preparation of test procedures and suggests the points to be considered by technical... Active Project
P112 - Draft Standard Test Procedure for Polyphase Induction Motors and Generators Instructions for conducting and reporting the more generally applicable and acceptable tests of polyphase induction motors and generators are covered. Active Project
P115 - Guide for Test Procedures for Synchronous Machines Part I-Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis This guide contains instructions for conducting generally applicable and accepted tests to determine the performance characteristics of... Active Project
P149 - Recommended Practice for Antenna Measurements The purpose is to provide guidance on the measurement of antenna transmitting and receiving properties. Active Project
P260.1 - Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units) The existing standard on unit symbols has been updated to conform to current international standard practices. An informative annex has been... Active Project
P260.4 - Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics To clarify the technical literature of acoustics by providing a standard set of letter symbols for use in mathematical formulations, and a... Active Project
P280 - Standard Letter Symbols for Quantities Used in Electrical Science and Electrical Engineering This standard covers letter symbols used to represent physical quantities in the field of electrical science and electrical engineering. These... Active Project
P287.1 - Precision Coaxial Connectors at RF, Microwave and Millimeter-wave Frequencies The purpose of this standard is to present minimum performance requirements for those precision connectors used at RF, microwave and millimeter... Active Project
P287.2 - Recommended Practice for Precision Coaxial Connectors at RF, Microwave and Millimeter-wave Frequencies - Part 2: Test Procedures The purpose of this Recommended Practice is to present state-of-the-art test procedures that can be used to verify the performance of coaxial... Active Project
P287.3 - Recommended Practice for Precision Coaxial Connectors at RF, Microwave and Millimeter-wave Frequencies - Part 3: Connector Effects, Uncertainty Specifications and Recommendations for Performance The purpose of this Recommended Practice is to present information and tools that will inform coaxial connector users and will enhance users' use... Active Project
P336 - Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities The purpose of this recommended practice is to identify the activities, instructions, and attributes that should be considered in the process of... Active Project
P360 - Wearable Consumer Electronic Devices - Overview and Architecture Wearables are gaining popularity among consumers and foreseen to become one significant category of consumer electronics. Standardization efforts... Active Project
P378 - Recommended Practices for Scattering Parameter Measurements Using Vector Network Analyzers Provide definitions of terms commonly used by users and manufacturers of vector network analyzers. Define and describe measurement techniques,... Active Project
P389 - Recommended Practice for Testing Transformers and Inductors For Electronics Applications This recommended practice presents a number of tests for use in determining the significant parameters and performance characteristics of... Active Project
P400.3 - Guide for Partial Discharge Field Diagnostic Testing of Shielded Power Cable Systems This guide describes diagnostic methods capable of detecting and locating partial discharges from defects and damage in installed shielded power... Active Project
P433 - Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage Rating up to 30 kV at Very Low Frequency The purpose of this recommended practice is as follows: a) To provide a uniform procedure for testing the stator (armature) insulation of ac... Active Project
P450 - Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications The purpose of this recommended practice is to provide the user with information and recommendations concerning the maintenance, testing, and... Active Project
P515 - the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications The provisions of this standard should ensure that process, fluid, or material temperatures are maintained and provide electrical, thermal, and... Active Project
P532 - Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables The guide provides cable users assistance in the selection of jackets for the purpose of optimizing cable design and performance. A secondary... Active Project
P802c - Overview and Architecture Amendment: Local Medium Accesss Control (MAC) Address Usage This standard serves as the foundation for the family of IEEE 802 standards published by IEEE for local area networks (LANs), metropolitan area... Active Project
P802d - Draft Overview and Architecture- Amendment: Allocation of Uniform Resource Name (URN) values in IEEE 802 standards This amendment to IEEE Std 802-2014 describes how URN values are allocated in IEEE 802(TM) standards. Active Project
P802E - Recommended Practice for Privacy Considerations for 802 Technologies The purpose of this recommended practice is to promote a consistent approach by IEEE 802 protocol developers to mitigate privacy threats... Active Project
P844.1/CSA C22.2 No.293.1 - Draft Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements General requirements, testing, markings, and documentation for skin effect trace heating systems for pipelines, vessels, equipment, and structures... Active Project
P844.2/CSA C293.2 - Draft Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - Application Guide for Design, Installation, Testing, Commissioning, and Maintenance An application guide for the design, installation, testing, commissioning and maintenance of skin effect trace heating systems for pipelines,... Active Project
P844.3 - Impedance Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements This standard provides the user with the general, testing, marking, and documentation requirements for the design and manufacture of impedance... Active Project
P844.4 - Impedance Heating of Pipelines, Vessels, Equipment, and Structures - Application Guide for Design, Installation, Testing, Commissioning and Maintenance This document aids the user in specifying, installing, operating, testing, and maintaining impedance heating systems that will: A) Maintain design... Active Project
P844.5 - Recommended Practice for the Design, Installation, Testing, Commissioning and Maintenance of Induction Heating Systems for Pipelines, Vessels, Equipment, Structures and Induction Susceptor Heating Furnaces This document aids the user in specifying, installing, operating, testing, and maintaining induction heating systems that will: A) Maintain design... Active Project
P945 - Recommended Practice for Preferred Metric Units for Use in Electrical and Electronics Science and Technology The purpose of this recommended practice is to aid in the selection of appropriate metric units for physical quantities that are of interest to... Active Project
P1057 - Digitizing Waveform Recorders The main purpose of this standard is to ensure that manufactures and users of waveform recorders have a well-defined set of specifications and... Active Project
P1122 - Digital Recorders for Measurements in High-Voltage and High-Current Impulse Tests This standard is applicable to digital recorders and digital oscilloscopes used for measurements during tests with high-impulse voltages and high... Active Project
P1138 - Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines This standard covers the construction, mechanical and electrical performance, acceptance criteria, and test requirements for overhead ground wire ... Active Project
P1149.10 - Draft High Speed Test Access Port and On-chip Distribution Architecture Circuitry that may be built into an integrated circuit to assist in the test, maintenance and support of assembled printed circuit boards,... Active Project
P1188 - Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications This recommended practice is limited to maintenance, test schedules, and testing procedures that can be used to optimize the life and performance... Active Project
P1202 - Testing Flame-Propagation and Smoke Generation of Cable or Splices/Connectors The purpose of this standard is to establish test protocols and performance criteria to determine the flame propagation tendency and optionally,... Active Project
P1210 - Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable This standard describes tests for determining the compatibility of cable-pulling lubricants with cable jacket or other exterior cable coverings.... Active Project
P1241 - Terminology and Test Methods for Analog-to-Digital Converters This standard identifies ADC error sources and provides test methods with which to perform the required error measurements. The information in... Active Project
Displaying results 1 - 40 of 116 - all