IEEE-SA STANDARDS BOARD
STANDARDS REVIEW COMMITTEE
(RevCom)
MEETING AGENDA
10 September 2009
9:00 a.m. – 2:00 p.m.
Piscataway, NJ, USA
1 CALL TO ORDER
2 REVIEW AND APPROVAL OF AGENDA
3 APPROVAL OF THE 16 June RevCom MINUTES
4 ProCom LIAISON REPORT
5 5-YEAR LIST FOLLOW-UP
6 PROPOSED STANDARDS FOR REVIEW AND RECOMMENDATION
6.1 New
P802.3at/D4.2 (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems – Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Data Terminal Equipment (DTE) Power Via the Media Dependent Interface (MDI) Enhancements
P802.3av/D3.4 (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Physical Layer Specifications and Management Parameters for 10Gb/s Passive Optical Networks
P802.3bc/D3.1 (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Ethernet Organizationally Specific Type, Length, Values (TLVs)
P802.11n/D11.0 (C/LM) Standard for Local and Metropolitan Area Networks - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) - Amendment: Enhancements for Higher Throughput
P802.11w/D11.0 (C/LM) Standard for Local and Metropolitan Area Networks - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) - Amendment: Protected Management Frames
P802.15.3c/D13 (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPANs) - Amendment 2: Millimeter-Wave Based Alternative Physical Layer Extension
P1137-1991/Cor1/D2 (PE/PSC) Guide for the Implementation of Inductive Coordination Mitigation Techniques and Application – Corrigendum 1
P1657/D29 (PE/SB) Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
P1665/D15 (PE/EM) Guide for the Rewind of Synchronous Generators, 50 and 60 Hz, Rated 1 MVA and Above
P1671.1/D4 (SCC20) Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Equipment and Test Information via XML: Exchanging Test Descriptions
P1698/D1.4 (VT/RT) Guide for the Calculation of Braking Distances for Rail Transit Vehicles
PC37.06/D11 (PE/SWG) Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities for Voltages above 1000 Volts
PC37.233/D3.2 (PE/PSR) Guide for Power System Protection Testing
PC37.234/D9.10 (PE/PSR) Guide for Protective Relay Applications to Power System Buses
PC57.12.38/D6.4 (PE/TR) Standard for Padmounted Type, Self-Cooled, Single Phase Distribution Transformers; High Voltage, 34 500 GrdY/19 920 Volts and Below, Low Voltage, 240/120 Volts; 167 kVA and Smaller
PC135.62/D9 (PE/T&D) Standard for Zinc-Coated Forged Anchor Shackles6.2 Revision
P603/D2 (PE/NPE) Standard Criteria for Safety Systems for Nuclear Power Generating Stations
P802.1AB/D6.0 (C/LM) Standard for Local and Metropolitan Area Networks - Station and Media Access Control Connectivity Discovery
P1068/DB2 (IAS/PCI) Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical and Process Industries
P1138/D14.0 (PE/PSC) Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
P1534/D4.0 (PE/SUB + PE/T&D) Recommended Practice for Specifying Thyristor-Controlled Series Capacitors
PC57.13.5/D6 (PE/TR) Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
PC57.15/D8.6 (PE/TR) Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
PC62.64 /D15 (PE/SPDLV) Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
6.3 Reaffirmation
344-2004 (PE/NPE) IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
522-2004 (PE/EM) IEEE Guide for Testing Turn Insulation on Form-Wound Stator Coils for Alternating-Current Rotating Electric Machines
951-1996 (PE/T&D) IEEE Guide to the Assembly and Erection of Metal Transmission Structures
1043-1996 (R2003) (DEI/SC) IEEE Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils
1175.3-2004 (C/S2ESC) IEEE Standard for CASE Tool Interconnections - Reference Model for Specifying Software Behavior
1394.1-2004 (C/MSC) IEEE Standard for High Performance Serial Bus Bridges
1474. 1-2004 (VT/RT) IEEE Standard for Communications-Based Train Control (CBTC) Performance and Functional Requirements
1484.11.2-2003 (C/LT) IEEE Standard for Learning Technology - ECMAScript Application Programming Interface for Content to Runtime Services Communication
1531-2003 (PE/T&D) IEEE Guide for Application and Specification of Harmonic Filters
C37.114-2004 (PE/PSR) IEEE Guide for Determining Fault Location on AC Transmission and Distribution Lines
7 EARLY CONSIDERATION PROCESS
8 OLD BUSINESS
8.1 Working Guide Update Ad Hoc – RAC Coordination Information in RevCom Materials – Parsons
8.2 Balloting Process – ‘Comment Resolution Status’ Instructions – Law
8.3 5.4.3.1 Ad Hoc Update – Comment Resolution – Chaplin
9 NEW BUSINESS
9.1 Joint Development Projects – Submittal Information – Haasz
9.2 Purpose Requirement for PAR and Draft – Law
10 NEXT MEETING
The next RevCom meeting will be Tuesday, 8 December 2009, in Piscataway, NJ, US. The submittal deadline for this meeting is 19 October 2009.
11 ADJOURNMENT
