IEEE-SA STANDARDS BOARD STANDARDS REVIEW COMMITTEE (RevCom)
MEETING AGENDA
26 September 2007
8:30 a.m. – 2:00 p.m.
IEEE Operations Center, Piscataway, New Jersey

1 CALL TO ORDER

2 REVIEW AND APPROVAL OF AGENDA

3 APPROVAL OF THE 6 JUNE 2007 RevCom MINUTES

4 ProCom LIAISON REPORT

5 PROPOSED STANDARDS FOR REVIEW AND RECOMMENDATION

5.1 New

P802.1ag/D8.1 (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 5: Connectivity Fault Management

P802.16g/D9 (C/LM & MTT) Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Amendment 3: Management Plane Procedures and Services

P1484.20.1/D7 (C/LT) Standard for Learning Technology – Data Model for Reusable Competency Definitions

P1516.4/Dx.1 (C/SI) Recommended Practice for Verification, Validation, and Accreditation of a Federation — an Overlay to the High Level Architecture Federation Development and Execution Process

P1542/D8 (PE/T&D) Guide for Installation, Maintenance, and Operation of Irrigation Equipment Located Near or Under Power Lines

P1617/D7.0 (PE/IC) Guide for Detection, Mitigation, and Control of Concentric Neutral Corrosion in Medium Voltage Underground Cables

P1636.1/D3 (SCC20) Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)

P1661/D11 (SCC21) Guide For Test and Evaluation of Lead-acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems

PC37.101-2006/Cor 1/D2 (PE/PSR) Guide for Generator Ground Protection - Corrigendum 1: Annex A.2 Phasor Analysis (Informative)

PC37.230/D6.1 (PE/PSR) Guide for Protective Relay Applications to Distribution Lines

PC37.235/D4-R1 (PE/PSR) Guide for the Application of Rogowski Coils used for Protective Relaying Purposes

PC57.12.36/D11 (PE/TR) Standard Requirements for Liquid-Immersed Distribution Substation Transformers

5.2 Revision

P99/D2.0 (SCC04) Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electrical Equipment

P495/D13 (PE/IC) Guide for Testing Faulted Circuit Indicators

P532/D9.6 (PE/IC) Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables

P741/D2 (PE/NPE) Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations

P1189/D15 (PE/SB) Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications

PC37.20.7/D14 (PE/SWG) Guide for Testing Metal-Enclosed Switchgear Rated Up to 38kV for Internal Arcing Faults

C57.12.35/D7 (PE/TR) Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators

PC57.129/D10 (PE/TR) Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers

5.3 Reaffirmation

95-2002 (PE/EM) IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage

98-2002 (SCC04) IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials

111-2000 (PEL) IEEE Standard for Wide-Band (Greater Than 1 Decade) Transformers

252-1995 (R2002) (PE/EM) IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

387-1995 (R2001) (PE/NPE) IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations

388-1992 (R1998) (PEL) IEEE Standard for Transformers and Inductors in Electronic Power Conversion Equipment

389-1996 (PEL) IEEE Recommended Practice for Testing Electronics Transformers and Inductors

390-1987 (R1998) (PEL) IEEE Standard for Pulse Transformers

393-1991 (R1998) (PEL/ET) IEEE Standard for Test Procedures for Magnetic Cores

449-1998 (PEL) IEEE Standard for Ferroresonant Voltage Regulators

563-1978 (R2002) (PE/T&D) IEEE Guide on Conductor Self-Damping Measurements

637-1985 (R2002) (PE/TR) IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use

664-1993 (R2000) (PE/T&D) IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibration Dampers for Single Conductors

691-2001 (PE/T&D) IEEE Guide for Transmission Structure Foundation Design and Testing

1063-2001 (C/S2ESC) IEEE Standard for Software User Documentation

1110-2002 (PE/EM) IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses

1122-1998 (PE/PSIM) IEEE Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests

1175.1-2002 (C/S2ESC) IEEE Guide for CASE Tool Interconnections - Classification and Description

1425-2001 (PE/IC) IEEE Guide for the Evaluation of the Remaining Life of Impregnated Paper-Insulated Transmission Cable Systems

1802.3-2001 (C/LM) IEEE Conformance Test Methodology for IEEE Standards for Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access With Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications

C37.09-1999 (PE/SWG) IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
[Also C37.09a-2005 and C37.09-1999/Cor1-2007]

C37.20.1-2002 (PE/SWG) IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
[Also C37.20.1a-2005 and C37.20.1b-2006]

6 EARLY CONSIDERATION PROCESS

6.1 Discussion on Future Direction of Early Consideration Process - Ringle

7 OLD BUSINESS

7.1 Visibility of Comments Ad Hoc Report - Grow

7.2 Fixing the Reaffirmation Process Ad Hoc Report - Thompson

8 NEW BUSINESS

8.1 Proposed RevCom Submittal Form Updates – Haasz

9 NEXT MEETING
The next RevCom meeting will be Tuesday, 4 December 2007, in Hallandale Beach, Florida. The submittal deadline for this meeting is 15 October 2007.

10 ADJOURNMENT