IEEE-SA STANDARDS BOARD STANDARDS REVIEW COMMITTEE (RevCom)
MEETING AGENDA
26 March 2008
9:00 a.m. – 2:00 p.m.
Piscataway, New Jersey, USA
1 CALL TO ORDER
2 REVIEW AND APPROVAL OF AGENDA
3 APPROVAL OF THE 4 December 2007 RevCom MINUTES
4 ProCom LIAISON REPORT5 5-YEAR REVIEW UPDATE
6 PROPOSED STANDARDS FOR REVIEW AND RECOMMENDATION6.1 New
P525-2007/Cor1/D2 (PE/SUB) Guide for the Design and Installation of Cable Systems in Substations - Corrigendum 1
P1594/D3 (PE/PSC) Standard for Helically-Applied Fiber Optic Cable Systems (WRAP Cable) for Use on Overhead Utility Lines
P1613a/D3.2 (PE/SUB) IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations - Amendment 1: Rated Altitude and Altitude Derating Factors
P1631/D3 (BT/RF Tech) Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA
P1633/D14 (RS) Recommended Practice on Software Reliability
P1900.2/D4.02 (EMC/SDCom) Recommended Practice for the Analysis of In-Band and Adjacent Band Interference and Coexistence Between Radio Systems
P2600/D33b (C/IA) Standard for Information Technology: Hardcopy Device and System Security
PC57.18.10a/D2 (PE/TR) Standard Practices and Requirements for Semiconductor Power Rectifier Transformers - Amendment 1: Technical and Editorial Corrections
PC62.11a/D9F (PE/SPDHV) IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) - Amendment: Short-Circuit Tests for Station, Intermediate and Distribution Arresters
6.2 Revision
P686/D2 (AES/RS) Standard Radar Definitions
P829/D11 (C/S2ESC) Standard for Software and System Test Documentation
P1588/D2.2 (IM/ST) Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
PC57.13/D9 (PE/TR) Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
PC57.21/D14 (PE/TR) Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
PC57.110/D6 (PE/TR) Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
6.3 Reaffirmation
260.4-1996 (R2002) (SCC14) American National Standard Letter Symbols and Abbreviations for Quantities Used in Acoustics
379-2000 (PE/NPE) IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
420-2001 (PE/NPE) IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations
644-1994 (R2001) (PE/T&D) IEEE Standard Procedures for Measurement of Power Frequency Electric and Magnetic Fields From AC Power Lines
859-1987 (R2002) (PE/PSACE) IEEE Standard Terms for Reporting and Analyzing Outage Occurrences and Outage States of Electrical Transmission Facilities
1149.1-2001 (C/TT) IEEE Standard Test Access Port and Boundary Scan Architecture
1178-1990 (R2002) (C/MSC) IEEE Standard for the Scheme Programming Language
1523-2002 (DEI) IEEE Guide for the Application, Maintenance, and Evaluation of Room Temperature Vulcanising (RTV) Silicone Rubber Coatings for Outdoor Ceramic Insulators
1541-2002 (SCC14) IEEE Standard Prefixes for Binary Multiples
C37.14-2002 (PE/SWG) IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosure
C37.48.1-2002 (PE/SWG) IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV
C57.12.32-2002 (PE/TR) IEEE Standard for Submersible Equipment - Enclosure Integrity
C57.105-1978 (R1999) (PE/TR) IEEE Guide for Application of Transformer Connections in Three-Phase Distribution Systems
C57.109-1993 (R2000) (PE/TR) IEEE Guide for Liquid-Immersed Transformer Through-Fault-Current Duration
C57.119-2001 (PE/TR) IEEE Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings
C95.4-2002 (SCC39) IEEE Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
7 EARLY CONSIDERATION PROCESS
8 OLD BUSINESS8.1 Report from Ad Hoc on IEEE-SA SASB OpMan 9.4 – Kulick
8.2 Update on Changes to Recirculation Cover Letter – Gerdon
9 NEW BUSINESS
9.1 Guide Review – Law
9.1.1 Working Guide for Submittal of Proposed Standards – Law
9.1.2 IEEE-SA Standards Board Form for Submittal of Proposed Standards – Law
9.1.3 Sample RevCom Submittal Review Checklist – Law
9.1.4 New Document – RevCom Review Tips – Law
9.2 myProject Features Update – Sahr
9.2.1 PAR Approval Letter Requirement for RevCom Submittal Package – Law
9.2.2 Affiliation Information – Law
9.3 Role of Preliminary Comments – Law
10 NEXT MEETING
The next RevCom meeting will be Wednesday, 11 June 2008, in Piscataway, New Jersey, USA. The submittal deadline for this meeting is 2 May 2008.
11 ADJOURNMENT
