IEEE-SA STANDARDS BOARD
STANDARDS REVIEW COMMITTEE
(RevCom)
MEETING AGENDA
8 December 2009
9:00 a.m. – 2:00 p.m.
Piscataway, NJ, US
1 CALL TO ORDER
2 REVIEW AND APPROVAL OF AGENDA
3 APPROVAL OF THE 10 September RevCom MINUTES
4 ProCom LIAISON REPORT
5 5-YEAR LIST
6 PROPOSED STANDARDS FOR REVIEW AND RECOMMENDATION
6.1 New
P802.1aj/D4.2 (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 08: Two-Port Media Access Control (MAC) Relay
P802.1AR/D2.3 (C/LM) Standard for Local and Metropolitan Area Networks: Secure Device Identity
P802.1Qav/D7.0 (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment XX: Forwarding and Queuing Enhancements for Time-Sensitive Streams
P802.3-2008/Cor1/D2.0 (C/LM) Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 1 Timing Considerations for PAUSE Operation
P1149.7/D1.24 (C/TT & BOG/CAG) Standard for Reduced-pin and Enhanced-functionality Test Access Port and Boundary Scan Architecture
P1680.1/D3 (C/EASC) Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
P1685/D6 (C/DA & BOG/CAG) Standard for IP-XACT, Standard Structure for Packaging, Integrating and Re-Using IP Within Tool-Flows
P1733/D6.0 (C/MSC) Standard for Layer 3 Transport Protocol for Time Sensitive Applications in Local Area Networks
P2600.2/D47a (C/IA) Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment B
P2600.3/D47a (C/IA) Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment C
P2600.4/D47a (C/IA) Standard Protection Profile for Hardcopy Devices in IEEE Std. 2600-2008 Operational Environment D
PC37.42/D11 (PE/SWG) Standard Specifications for High Voltage (> 1000 Volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
6.2 Revision
P115/D3 (PE/EM) Guide for Test Procedures for Synchronous Machines - Part I - Acceptance and Performance Testing - Part II - Test Procedures and Parameter Determination for Dynamic Analysis
P433/D16 (PE/EM) Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency
P802.1X/D4.5 (C/LM) Standard for Local and Metropolitan Area Networks - Port-Based Network Access Control
P1068/DB2 (IAS/PCI) Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical and Process Industries
P1142/D1.2 (PE/IC) Guide for the Selection, Testing, Application and Installation of Cables Having Radial Moisture Barriers and/or Longitudinal Water Blocking
P1481/D3 (C/DA) Standard for Integrated Circuit (IC) Open Library Architecture (OLA)
P1680/D6 (C/EASC) Standard for Environmental Assessment of Electronic Products
PC37.015/D9 (PE/SWG) Guide for the Application of Shunt Reactor Switching
PC57.12.34/D4F (PE/TR) Standard for Requirements for Pad-Mounted, Compartmental Type, Self Cooled, Three Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below
6.3 Reaffirmation
62.2-2004 (PE/EM) IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Electrical Machinery
82-2002 (PE/IC) IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
635-2003 (PE/IC) IEEE Guide for Selection and Design of Aluminum Sheaths for Power Cables
771-1998 (R2004) (SCC20) IEEE Guide to the Use of the ATLAS Specification
830-1998 (C/S2ESC) IEEE Recommended Practice for Software Requirements Specification
1008-1987 (R2002) (C/S2ESC) IEEE Standard for Software Unit Testing
1061-1998 (R2004) (C/S2ESC) IEEE Standard for a Software Quality Metrics Methodology
1217-2001 (PE/T&D) IEEE Guide for Preservative Treatment of Wood Distribution and Transmission Line Structures
1233-1996 (R2002) (C/S2ESC) IEEE Guide for Developing System Requirements Specifications
1264-1993 (R2004) (PE/SUB) IEEE Guide for Animal Deterrents for Electric Power Supply Substations
1445-1998 (R2004) (SCC20) IEEE Standard for Digital Test Interchange Format (DTIF)
1526-2003 (SCC21) IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
1621-2004 (C/MSC) IEEE Standard for User Interface Elements in Power Control of Electronic Devices Employed in Office/Consumer Environments
2001-2002 (C/S2ESC) IEEE Recommended Practice for the Internet - Web Site Engineering, Web Site Management, and Web Site Life Cycle
C37.81-1989 (R2005) (PE/SWG) IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies
C37.82-1987 (R2004) (PE/SWG) IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
C57.121-1998 (PE/TR) IEEE Guide for Acceptance and Maintenance of Less Flammable Hydrocarbon Fluid in Transformers
C57.124-1991 (R2002) (PE/TR) IEEE Recommended Practice for the Detection of Partial Discharge and the Measurement of Apparent Charge in Dry-Type Transformers7 EARLY CONSIDERATION PROCESS
8 OLD BUSINESS
8.1 Evidence of RAC Coordination When No RAC Comments Submitted – Action Item Update – Law
8.2 Comment Resolution Status Ad Hoc – Update – Law
9 NEW BUSINESS
None
10 NEXT MEETING
The next RevCom meeting will be Tuesday, 24 March 2010, in Piscataway, NJ, US. The submittal deadline for this meeting is 12 February 2010.
11 ADJOURNMENT
