PC37 through PC135
PC37.04a (PE/SWG) Standard Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis: Amendment 1 - Capacitance Current Switching
PC37.04b (PE/SWG) Amendment to "IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis" to change the description of Transient Recovery Voltage for harmonization with IEC 60056
PC37.06 (PE/SWG) Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities for Voltages above 1000 Volt
PC37.09b (PE/SWG) Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -- Amendment 2: Transient Recovery Voltage Requirements During Power Tests
PC37.09-1999/Cor 1 (PE/SWG) Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Corrigendum 1
PC37.013a (PE/SWG) Amendment to the Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis, for use with Generators Rated 10-100 MVA
PC37.016 (PE/SWG) Standard for AC High Voltage Circuit Switchers rated 15kV through 245kV
PC37.1 (PE/SUB) Standard for SCADA and Automation Systems
PC37.2 (PE/SUB) Standard Electrical Power System Device Function Numbers and Contact Designations
PC37.12 (PE/SWG) Standard for AC High-Voltage Circuit Breakers - Specification Guide
PC37.12.1 (PE/SWG) Guide for High Voltage (>1000V) Circuit Breaker Instruction Manual Content
PC37.13 (PE/SWG) Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
PC37.16 (PE/SWG) Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635V and below) and DC (3200V and below) Power Circuit Breakers
PC37.17 (PE/SWG) Standard for Direct-Acting Trip Systems for Low-Voltage (up to 635 V) AC and General Purpose Low Voltage (up to 325 V) DC Power Circuit Breakers
PC37.20.1b (PE/SWG) Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear -- Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in dc Traction Power Switchgear
PC37.20.6 (PE/SWG) Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures
PC37.20.7 (PE/SWG) Guide for Testing Metal-Enclosed Switchgear Rated up to 38kV for Internal Arc Faults
PC37.27 (PE/SWG) Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuit Breakers (Using Separately Mounted Current-Limiting Fuses)
PC37.30.1 (PE/SWG) Standard Requirements For High Voltage Air Switches And Interrupting Switches for Alternating Current, Rated Above 1,000 Volts
PC37.41 (PE/SWG) Standard design tests for high-voltage (>1000 V) fuses, distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories
PC37.43 (PE/SWG) Standard Specifications for High-Voltage Expulsion, Current-Limiting and Combination Type Distribution and Power Class External Fuses, With Rated Voltages from 1 through 38Kv, Used for the Protection of Shunt Capacitors
PC37.45 (PE/SWG) Standard Specifications for High-Voltage Distribution Class Enclosed Single-Pole Air Switches With Rated Voltages from 1 Through 8.3 Kv
PC37.53.1 (PE/SWG) Standard Conformance Test Procedures for High-Voltage Current-Limiting Motor-Starter Fuses With Rated Voltages from 1 Through 38 kV
PC37.59 (PE/SWG) Standard Requirements for Conversion of Power Switchgear Equipment
PC37.63 (PE/SWG) Standard requirements for overhead, pad-mounted, dry-vault, and submersible automatic line sectionalizers for AC systems
PC37.74 (PE/SWG) IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
PC37.91 (PE/PSR) Guide for Protecting Power Transformers
PC37.100.1 (PE/SWG) Standard of Common Requirements for High Voltage Power Switchgear Rated 1000 V and Above
PC37.101 (PE/PSR) Guide for Generator Ground Protection
PC37.102 (PE/PSR) Guide for AC Generator Protection
PC37.105 (PE/PSR) Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations
PC37.109 (PE/PSR) Guide for the Protection of Shunt Reactors
PC37.110 (PE/PSR) Guide for the Application of Current Transformers Used for Protective Relaying Purposes
PC37.111 (PE/PSR) Common Format for Transient Data Exchange (COMTRADE) for Power Systems
PC37.113 (PE/PSR) Guide for Protective Relay Applications to Transmission Lines
PC37.115 (PE/PSR) Standard Test Method for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control and Data Acquisition System
PC37.116 (PE/PSR) Guide for Protective Relay Application to Transmission-Line Series Capacitor Banks
PC37.117 (PE/PSR) Guide for the Application of Protective Relays Used for Abnormal Frequency Load Shedding and Restoration
PC37.122 (PE/SUB) and (PE/SWG) IEEE Standard for High Voltage Gas-Insulated Substations
PC37.230 (PE/PSR) Guide for Protective Relay Applications to Distribution Lines
PC37.231 (PE/PSR) Recommended Practice for Microprocessor-based Protection Equipment Firmware Control
PC37.232 (PE/PSR) Recommended Practice for Naming Time Sequence Data Files
PC37.233 (PE/PSR) Guide For Power System Protection Testing
PC37.234 (PE/PSR) Guide for Protective Relay Applications to Power System Buses
PC37.235 (PE/PSR) Guide for the Application of Rogowski Coils used for Protective Relaying Purposes
PC37.301 (PE/SWG) Recommended Practice for Partial Discharge Measurement in Power Switchgear Rated above 1000 V
PC57.12.00 (PE/TR) Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
PC57.12.10 (PE/TR) Standard Requirements for Liquid-Immersed Power Transformers
PC57.12.20 (PE/TR) Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34 500 Volts and Below; Low Voltage, 7970/13 800Y Volts and Below
PC57.12.23 (PE/TR) Standard for Submersible Single-Phase Transformers; 167kVA and Smaller; High-Voltage 25 000 Volts and Below; Low Voltage 600 Volts and Below
PC57.12.28 (PE/TR) Standard for Pad Mounted Equipment - Enclosure Integrity
PC57.12.29 (PE/TR) Standard for Pad Mounted Equipment - Enclosure Integrity for Coastal Environments
PC57.12.34 (PE/TR) Requirements for Pad-Mounted, Compartmental Type, Self Cooled; Three Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5kV Nominal System Voltage and Below; Low Voltage, 15kv Nominal System Voltage and Below
PC57.12.35 (PE/TR) Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators
PC57.12.36 (PE/TR) Standard Requirements for Liquid-Immersed Distribution Substation Transformers
PC57.12.38 (PE/TR) Standard for Padmounted Type, Self-Cooled, Single Phase Distribution Transformers; High Voltage, 34500 GrdY/19920 Volts and below, Low voltage, 480 Volts and below; 167 KVA and smaller
PC57.12.51 (PE/TR) Ventilated Dry-type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34500 Volts; Low-Voltage 208Y/120 to 4160 Volts
PC57.12.60 (PE/TR) Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry Type Power and Distribution Transformers, Including Ventilated, Solid-Cast and Resin Encapsulated Transformers
PC57.12.80 (PE/TR) Standard Terminology for Power and Distribution Transformers
PC57.12.80a (PE/TR) Standard Terminology for Power and Distribution Transformers - Amendment 1: Definition of Thermally Upgraded Paper
PC57.12.90 (PE/TR) Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
PC57.12.91 (PE/TR) IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
PC57.13 (PE/TR) Standard Requirements for Instrument Transformers
PC57.13.1 (PE/PSR) Guide for Field Testing of Relaying Current Transformers
PC57.13.5 (PE/TR) Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
PC57.15 (PE/TR) Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators
PC57.16 (PE/TR) Standard Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors
PC57.18.10a (PE/TR) Standard Practices and Requirements for Semiconductor Power Rectifier Transformers - Amendment 1: Technical and Editorial Corrections
PC57.19.100 (PE/TR) Guide for Application of Power Apparatus Bushings
PC57.21 (PE/TR) Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
PC57.32 (PE/TR) Standard Requirements, Terminology and Test Procedures for Neutral Grounding Devices
PC57.91 (PE/TR) Guide for Loading Liquid Immersed Transformers and Voltage Regulators
PC57.93 (PE/TR) Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
PC57.98 (PE/TR) Guide for Transformer Impulse Tests
PC57.100 (PE/TR) Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
PC57.104 (PE/TR) Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
PC57.106 (PE/TR) Guide for Acceptance and Maintenance of Insulating Oil in Equipment
PC57.110 (PE/TR) Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
PC57.119 (PE/TR) Recommended Practice for Performing Temperature Rise Tests on Oil Immersed Power Transformers at Loads Beyond Nameplate Rating
PC57.127 (PE/TR) Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors
PC57.129
(PE/TR) Standard for General Requirements and
Test Code for Oil-Immersed HVDC Converter Transformers
PC57.130
(PE/TR) IEEE Trial-Use Guide for the Use of Dissolved
Gas Analysis During Factory Temperature Rise Tests
for the Evaluation of Oil-Immersed Transformers
and Reactors
PC57.131 (PE/TR) Standard Requirements for Tap Changers
PC57.133 (PE/TR) Guide for Short-Circuit Testing of Distribution and Power Transformers
PC57.139 (PE/TR) Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
PC57.140 (PE/TR) Evaluation and Reconditioning of Liquid Immersed Power Transformers
PC57.143 (PE/TR) Guide for Application of Monitoring to Liquid-Immersed Transformers and Components
PC57.147 (PE/TR) Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
PC57.148 (PE/TR) Standard for Control Cabinets for Power Transformers
PC57.149 (PE/TR) Guide for the Application and Interpretation of Frequency Response Analysis for Oil Immersed Transformers
PC57.150 (PE/TR) Guide for the Transportation of Transformers and Reactors Rated 10,000 kVA or larger
PC57.151
(PE/TR) PC57.151 - Sound Level Measurement Guide
for Liquid Filled and Dry Type Transformers and
Reactors
PC62.11a (PE/SPD/HV) IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) - Amendment: Short-circuit tests for station, intermediate and distribution arresters
PC62.21-2003/Cor 1 (PE/SPD/HV) IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 Volts and Greater - Corrigendum 1: Correction to Equation A.3
PC62.21.1
(PE/SPD/HV) Recommended Practice for the Application
of Surge Voltage Protective Equipment on AC Rotating
Machinery Rated 1000 V or Greater and Less than
30 kV, Generators and Single-Turn Coil Motors
PC62.22
(PE/SPD) IEEE Guide for the Application of Metal-Oxide
Surge Arresters for Alternating-Current Systems
PC62.23 (PE/SPD/HV) Application Guide for Surge Protection of Electric Generating Plants
PC62.31 (PE/SPD) Standard Test Specification for Gas-Tube Surge-Protective Devices
PC62.33 (PE/SPD) Standard Test Specifications for Varistor Surge-Protective Devices
PC62.34
(PE/SPD) Standard for Performance of Low-Voltage
(1000 V rms or less, frequency between 48 Hz and
62 Hz) Surge Protective Devices (Secondary Arresters)
PC62.35
(PE/SPD) Standard Test Specifications for Avalanche
Junction Semiconductor Surge Protective Devices
PC62.37.1 (PE/SPD/LV) Guide for the Application of Thyristor Surge Protective Device Components
PC62.39 (PE/SPDLV)
Test Methods for Self-Restoring Current Limiter Components used in Telecommunication Surge Protectors
PC62.41.1 (PE/SPD/LV) Guide on the Surge Environment in
Low-Voltage (1000 V and less) AC Power Circuits
PC62.41.2 (PE/SPD/LV) Recommended Practice on Characterization
of Surges in Low-Voltage (1000 V and less) AC
power circuits
PC62.42 (PE/SPD/LV) Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to Or Less Than 1000 V (ac) Or 1200 V (dc)] Circuits
PC62.43 (PE/SPD) Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less Than 1000 Vrms or 1200 Vdc) Data, Communication, and Signaling Circuits
PC62.44 (PE/SPD) Guide for the Application of Low-Voltage (1000 Volts rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Load Side of the Service Entrance Panel)
PC62.45 (PE/SPD/LV) Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage AC Power Circuits
PC62.50 (PE/SPD/LV) Standard for Performance Criteria and Test Methods of Plug-in Multiport (Multiservice) Surge-Protective Devices for Equipment Connected to 120/240 V Single Phase Power Service and Communications Lines
PC62.51 (PE/SPD/LV) Standard for Performance Criteria and test Methods of Hardwired Multiport (Multiservice) Surge-Protective Devices for Equipment Connected to 120/240 V Single Phase Power Service and Communication Lines
PC62.62 (PE/SPD/LV) Standard Test Specifications for Surge-Protective Devices for Low Voltage AC Power Circuits
PC62.64 (PE/SPD) Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications, and Signaling Circuits
PC62.69 (PE/SPDLV) Standard Specifications for Self-Restoring Current Limiter Components used in Telecommunication Surge Protectors
PC62.72 (PE/SPD/LV) Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
PC62.82.1 (PE/SPD) Standard for Insulation Coordination - Definitions, Principles, and Rules
PC62.82.2 (PE/SPD) Guide for the Application of Insulation Coordination
PC62.92.3 (PE/SPD/HV) Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III—Generator Auxiliary Systems
PC62.92.4 (PE/SPD) Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV – Distribution
PC62.92.5 (PE/SPD/HV) Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V - Transmission Systems and Subtransmission Systems
PC93.4 (PE/PSC) Standard for Power-Line Carrier Line-Tuning Equipment (30-500 kHz) Associated With Power Transmission Lines
PC95.3.1 (SCC28) Recommended Practice for Measurements and Computation of Electric, Magnetic and Electromagnetic Fields With Respect to Human Exposure to Such Fields, 0 - 100 kHz
PC95.4 (SCC28) Recommended Practice for Determining Safe Distances From Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
PC135.1 (PE/T&D) Standard for Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction
PC135.11 (PE/T&D) Zinc-coated Ferrous Guy Attachments, Wrap and Formed Guy Hooks, Guy Strain Plates, and Pole Eye Plates
PC135.30 (PE/T&D) Ground Rod Electrode, Clamp & Coupling Specification
PC135.64 (PE/T&D) Guide For Design Testing of Bolted Deadend Strain Clamps
*Please note that only PARs submitted electronically
and approved since the December 1998 Standards
Board meeting are listed. If you should need a
PAR not listed on this site, please contact the
NesCom
Administrator.
