IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
17 JUNE 2010

Approved PARs for New Standards

  • P802.16n (C/LM): IEEE Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Broadband Wireless Access Systems Amendment: Higher Reliability Networks
  • P1484.11.1a (C/LT): IEEE Standard for Learning Technology — Data Model for Content Object Communication — Amendment
  • P1823 (C/MSC): Standard for a Universal Power Adapter for Mobile Devices
  • P1622 (C/SAB): Standard for Voting Systems Electronic Data Interchange
  • P2010 (EMB/Stds Com): Recommended Practice for Neurofeedback Systems
  • P1826 (IAS/PCI): Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100nkW
  • P1451.5-2007/Cor 1 (M/ST): IEEE Standard for a Smart Transducer Interface for Sensors and Actuator — Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats — Corrigendum 1
  • P1827 (PE/ED&PG): Guide for Electrical & Control Design of Hydroelectric Water Conveyance Facilities
  • P2646 (PE/NPE): Standard for Nuclear Power Plants — Control Rooms — Computer Based Procedures
  • PC37.118.2 (PE/PSR): Standard for Synchrophasor Data Transfer for Power Systems
  • PC37.13a (PE/SWG): Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures Amendment 1: Increase of Voltages to Include 1000 V AC and Below
  • PC37.100.2 (PE/SWG): Standard for Common Requirements for Testing of AC Capacitance Current Switching Devices over 1000V
  • PC37.302 (PE/SWG): Guide for Fault Current Limiter (FCL) Testing
  • P1453 (PE/T&D): Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems
  • PC57.130 (PE/TR): Trial-Use Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Oil-Immersed Transformers and Reactors
  • P1505.1.1 (SCC20): Standard for the Common Test Interface Pin Map (IEEE Std 1505.1) Using the IEEE Std 1671.6 Exchange Format
  • P1636.99 (SCC20): Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Common Information Elements
  • P1547.8 (SCC20): Recommended Practice for Establishing Methods and Procedures that Provide Supplemental Support for Implementation Strategies for Expanded Use of IEEE Standard 1547

PARs for Revision of Standards

  • P1800 (C/DA): Standard for System Verilog — Unified Hardware Design, Specification, and Verification Language
  • P11073-10404 (EMB/11073): Standard for Health Informatics — Personal Health Device Communication — Device Specialization — Pulse Oximeter
  • P21451-7 (IM/ST): Standard for Information Technology — Smart Transducer Interface for Sensors and Actuators — Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
  • P344 (PE/NPE): Recommended Practice for Seismic Qualification of Equipment for Nuclear Power Generating Stations
  • P1290 (PE/NPE): Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
  • P1613 (PE/SUB): Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations
  • PC37.66 (PE/SWG): Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
  • PC57.12.35 (PE/TR): Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators
  • PC57.12.44 (PE/TR): Standard Requirements for Secondary Network Protectors
  • P1641.1 (SCC20): Guide for the Use of IEEE Std 1641, Standard for Signal and Test Definition
  • P1671.1 (SCC20): Standard for Automatic Test Markup Language (ATML) Test Description
  • P1671.2 (SCC20): Standard for Automatic Test Markup Language (ATML) Instrument Description
  • P1671.3 (SCC20): Standard for Automatic Test Markup Language (ATML) Unit Under Test (UUT) Description
  • P1671.4 (SCC20): Standard for Automatic Test Markup Language (ATML) Test Configuration
  • P1671.5 (SCC20): Standard for Automatic Test Markup Language (ATML) Test Adaptor Description
  • P1671.6 (SCC20): Standard for Automatic Test Markup Language (ATML) Test Station Description
  • PC95.1 (SCC39): Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic and Electromagnetic Fields, 0 Hz to 300 GHz

Modified PARs

  • P1722 (C/MSC): Standard for Layer 2 Transport Protocol for Time Sensitive Applications in Bridged Local Area Networks
  • P14471 (C/S2ESC): Adoption of Guide ISO/IEC TR14471:2007 Information technology — Software engineering — Guidelines for the adoption of CASE Tools
  • P11073-10103 (EMB/11073): Standard for Health Informatics — Point-of-Care Medical Device Communication — Nomenclature — Implantable Device, Cardiac
  • 1659 (PE/IC): Guide for Connectors Used In Underground Cable Joints and Terminations for Voltages of 5 — 35 kV
  • P62582-1 (PE/NPE): Nuclear Power Plants — Instrumentation and Control Important to Safety — Electrical Equipment Condition Monitoring Methods — Part 1: General
  • 62582-2 (PE/NPE): Nuclear Power Plants — Instrumentation and Control Important to Safety — Electrical Equipment Condition Monitoring Methods — Part 2: Indenter Modulus
  • 62582-4 (PE/NPE): Nuclear Power Plants — Instrumentation and Control Important to Safety — Electrical Equipment Condition Monitoring Methods — Part 4: Oxidation Induction Techniques
  • C37.118.1 (PE/PSR): Standard for Synchrophasor Measurements for Power Systems
  • C62.82.1 (PE/SPDHV): Standard for Insulation Coordination — Definitions, Principles, and Rules
  • P81 (PE/SUB): Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
  • P1031 (PE/SUB): Guide for the Functional Specification of Transmission Static Var Compensators
  • P1613a (PE/SUB): IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations Amendment: Adding of one definition, DC power supply requirements (5.1), and Annex E — History
  • PC37.17 (PE/SWG): Standard for Trip Systems for Low-Voltage (up to 635 V) AC and General Purpose Low-Voltage (up to 600 V) DC Power Circuit Breakers
  • P1815 (PE/T&D): Standard for Electric Power Systems Communications — Distributed Network Protocol (DNP3)
  • PC57.100 (PE/TR): Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
  • PC57.139 (PE/TR): Guide for Dissolved Gas Analysis in Transformer Load Tap Changers
  • PSI_10 (SCC20): Standard for Metric Practice
  • P1900.5 (SCC41): Standard Policy Language Requirements and System Architectures for Dynamic Spectrum Access Systems
  • P1692 (PE/PSC): Guide for the Protection of Communication Installations from Lightning Effects
  • PC37.60 (PE/SWG): Standard for Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

Withdrawn PARs

  • P802.1H (C/LM): Recommended Practice for Local and Metropolitan Area Networks: Recommended Practice for Media Access Control (MAC) Bridging of Ethernet in Local Area Networks
  • P1622 (SCC38): Standard for Voting Equipment Electronic Data Interchange

New Standards

  • P671-1985/Cor1 (AES/GA): IEEE Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement — Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block Diagrams
  • P802.3ba (C/LM): IEEE Standard for Information Technology — Telecommunications and Information Exchange Between Systems — Local and Metropolitan Area Networks — Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications — Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 40 Gb/s and 100 Gb/s Operation
  • P802.11p (C/LM): IEEE Standard for Information Technology — Telecommunications and Information Exchange Between Systems — Local and Metropolitan Area Networks — Specific Requirements — Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications — Amendment 6: Wireless Access in Vehicular Environments
  • P802.16h (C/LM): IEEE Standard for Local and Metropolitan Area Networks — Part 16: Air Interface for Fixed Broadband Wireless Access Systems — Improved Coexistence Mechanisms for License-Exempt Operation Amendment
  • P1601 (PE/PSIM): Trial-Use Standard for Optical AC Current and Voltage Sensing Systems
  • P1679 (PE/SB): Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications
  • P1709 (IAS/PCI): Recommended Practice for 1 to 35kV Medium Voltage DC Power Systems on Ships
  • P1815 (PE/T&D + PE/SUB): Standard for Electric Power Systems Communications — Distributed Network Protocol (DNP3)
  • P11073-10420 (EMB/11073): Health Informatics — Personal Health Device Communication — Device Specialization — Body Composition Analyzer
  • P14102 (C/S2ESC): Adoption of ISO/IEC 14102:2008 Information Technology — Guideline for the Evaluation and Selection of CASE Tools
  • P14471 (C/S2ESC): Adoption of Guide ISO/IEC TR14471:2007 Information Technology — Software Engineering — Guidelines for the Adoption of CASE Tools
    Approve contingent on SASB approval of the modified PAR.
  • PC37.13.1a (PE/SWG): IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear — Amendment: Revise Short-Circuit Rating and Test Requirement
  • PC37.46 (PE/SWG): Standard Specifications for High Voltage (> 1000 V) Expulsion and Current-limiting Power Class Fuses and Fuse Disconnecting Switches
  • PC57.12.30 (PE/TR + PE/SWG): Standard for Pole-Mounted Equipment — Enclosure Integrity for Coastal Environments

Revision Standards

  • P7-4.3.2 (PE/NPE): Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations
  • P336 (PE/NPE): Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
  • P1241 (IM/WM&A): Standard for Terminology and Test Methods for Analog-to-Digital Converters
  • P1329 (COM/SC): Standard Method for Measuring Transmission Performance of Speakerphones
  • P1517 (C/S2ESC): Standard for Information Technology — System and Software Life Cycle Processes — Reuse Processes
  • P1641 (SCC20): Standard for Signal and Test Definition
  • PC57.12.00 (PE/TR): Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • PC57.12.31 (PE/TR + PE/SWG): Standard for Pole-Mounted Equipment — Enclosure Integrity
  • PC57.12.90 (PE/TR): Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
  • PC57.113 (PE/TR): Recommended Practice for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
  • PC57.123 (PE/TR): Guide for Transformer Loss Measurement

Reaffirmations

  • 292-1969 (R2005) (AES/GA): IEEE Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
  • 293-1969 (R2005) (AES/GA): IEEE Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros
  • 488.2-1992 (R2004) (IM/AI): IEEE Standard Codes, Formats, Protocols, and Common Commands for Use With IEEE Std 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation
  • 634-2004 (PE/IC): IEEE Standard Cable-Penetration Fire Stop Qualification Test
  • 820-2005 (PE/PSC): IEEE Standard Telephone Loop Performance Characteristics
  • 1003.13-2003 (C/PA): IEEE Standard for Information Technology — Standardized Application Environment Profile (AEP) — POSIX® Realtime and Embedded Application Support
  • 1003.26-2003 (C/PA): IEEE Standard for Information Technology — Portable Operating System Interface (POSIX®) — Part 26: Device Control Application Program Interface (API) [C Language]
  • 1120-2004 (PE/IC): IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems
  • 1227-1990 (R2001) (PE/T&D): IEEE Guide for the Measurement of DC Electric-Field Strength and Ion Related Quantities
  • 1278.3-1996 (R2002) (C/SI): IEEE Recommended Practice for Distributed Interactive Simulation — Exercise Management and Feedback
  • 1278.4-1997 (R2002) (C/SI): IEEE Recommended Practice for Distributed Interactive Simulation — Verification, Validation, and Accreditation
  • 1497-2001 (C/DA): IEEE Standard for Standard Delay Format (SDF) for the Electronic Design Process
  • C57.13.2-2005 (PE/TR): IEEE Standard Conformance Test Procedure for Instrument Transformers
  • C57.13.6-2005 (PE/TR): IEEE Standard for High-Accuracy Instrument Transformers