IEEE-SA Standards Board Approvals

New and revised standards projects, as well as new and revised standards put forth for approval by the Standards Board.

IEEE-SA STANDARDS BOARD APPROVALS
7 DECEMBER 2011

New PARs

  • P802.15.9 (C/LM) Recommended Practice for Transport of Key Management Protocol (KMP) Datagrams
  • P802.16.1a (C/LM) IEEE Standard for WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems - Amendment: Higher Reliability Networks
  • P802.16.1b (C/LM) IEEE Standard for WirelessMAN-Advanced Air Interface for Broadband Wireless Access Systems - Amendment: Enhancements to Support Machine-to-Machine Applications
  • P802.22b (C/LM) IEEE Standard for Information Technology—Telecommunications and information exchange between systems Wireless Regional Area Networks (WRAN)—Specific requirements Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands Amendment: Enhancement for Broadband Services and Monitoring Applications
  • P1903.1 (COM/SC) Standard for Content Delivery Protocols of Next Generation Service Overlay Network (NGSON)
  • P1903.2 (COM/SC) Standard for Service Composition Protocols of Next Generation Service Overlay Network (NGSON)
  • P1903.3 (COM/SC) Standard for Self-Organizing Management Protocols of Next Generation Service Overlay Network (NGSON)
  • P1908.1 (COM/SC) Virtual Keyboard Standard for Indic Languages
  • P1909.1 (COM/PLC) Recommended Practice for Smart Grid Communication Equipment - Test methods and installation requirements
  • P1202-2006/Cor 1 (PE/IC) IEEE Standard for Flame-Propagation Testing of Wire & Cable - Corrigendum 1
  • P487.4 (PE/PSC) Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Neutralizing Transformers
  • P487.5 (PE/PSC) Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Isolation Transformers
  • PC57.157 (PE/TR) Guide for Conducting Functional Life Tests for De-energized Tap-changer Contacts
  • P62704-4 (SCC39) Standard for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: General Requirements for Using the Finite Element Method (FEM) for SAR Calculations and Specific Requirements for Modeling Vehicle-Mounted Antennas and Personal Wireless Devices

PARs for Revision of Standards

  • P11073-20601 (EMB/11073) Standard for Health Informatics - Personal Health Device Communication - Application Profile - Optimized Exchange Protocol
  • PC62.22.1 (PE/IC) Guide for the Connection of Surge Arresters to Protect Insulated Shielded Electric Power Cable Systems Up to 46 kV
  • PC37.113 (PE/PSR) Guide for Protective Relay Applications to Transmission Lines
  • PC37.100.1 (PE/SWG) Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
  • PC57.12.36 (PE/TR) Standard Requirements for Liquid-Immersed Distribution Substation Transformers
  • PC57.12.37 (PE/TR) Standard for the Electronic Reporting of Distribution Transformer Test Data
  • PC57.12.59 (PE/TR) Guide for Dry-Type Transformer Through-Fault Current Duration
  • PC57.32 (PE/TR) Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
  • PC57.134 (PE/TR) Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers
  • P98 (SCC04) Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials

Modified PARs

  • P802.15.6 (C/LM) Standard for Wireless Body Area Networks
  • P802.16n (C/LM) IEEE Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Broadband Wireless Access Systems Amendment: Higher Reliability Networks
  • P802.16p (C/LM) IEEE Standard for Air Interface for Broadband Wireless Access Systems Amendment: Enhancements to Support Machine-to-Machine Applications
  • P828 (C/S2ESC) Standard for Configuration Management in Systems and Software Engineering
  • P1451.2 (IM/TC9) Standard for a Smart Transducer Interface for Sensors and Actuators - Serial Point-to-Point Interface
  • P1138-2009/Cor 1 (PE/PSC) Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines - Corrigendum 1: Stress Strain Temperature Correction
  • P62271-37-082 (PE/SWG) Standard for High-voltage Switchgear and Controlgear - Part 37-082: Measurement of sound pressure levels on alternating current circuit-breakers
  • PC37.60 (PE/SWG) Standard for High-Voltage Switchgear and Controlgear - Part 111: Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
  • P1705 (SASB/SCC31) Standard for Compliance Testing to Utility Industry Metering Communications Protocol Standards

Withdrawn PARs

  • P11073-10202 (EMB/11073) Standard for Health Informatics - Point-of-care medical device communication - Domain information model (DIM) - XML schema format
  • P11073-20301 (EMB/11073) Standard for Health Informatics - Point-of-care medical device communication - Application Profile - Optional package, remote control
  • P11073-20401 (EMB/11073) Standard for Health Informatics - Point-of-Care Medical Device Communication - Application Profile - Common Networking Infrastructure
  • P1299 (PE/IC) Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems
  • PC37.113 (PE/PSR) Guide for Protective Relay Applications to Transmission Lines
  • PC57.12.37a (PE/TR) IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data - Amendment: Updating to Include Efficiency Fields
  • PC57.32 (PE/TR) Standard Requirements, Terminology and Test Procedures for Neutral Grounding Devices
  • P1528.4 (SCC39) Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Requirements for Using the Finite-Element Method for SAR Calculations, specifically involving Vehicle Mounted Antennas and Personal Wireless Devices

Administrative Withdrawals of PARs

  • P1780 (AES/GA) Standard Specification Format Guide and Test Procedure for Inertial Measurement Units (IMU)
  • P1700 (C/IA) Standard for Information System Security Assurance Architecture (ISSAA)
  • P802.11mb (C/LM) Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan Area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications - Amendment: Accumulated maintenance changes
  • P1003.27 (C/PA) Information technology- POSIX(R) C++ Language Interfaces - Binding for System Application Program Interface (API)
  • P1723 (C/S2ESC) Standard for SOA (Service-Oriented Architecture) Solution Reference Architecture
  • P1244.2 (C/SS) Standard for Media Management System (MMS) Session Security, Authentication, Initialization Protocol (SSAIP)
  • P1244.3 (C/SS) Standard for Media Management System (MMS) Media Management Protocol (MMP)
  • P1244.4 (C/SS) Standard for Media Management System (MMS) Drive Management Protocol (DMP)
  • P1244.5 (C/SS) Standard for Media Management System (MMS) Library Management Protocol (LMP)
  • P11073-30503 (EMB/11073) Standard for Health informatics - Point-of-care medical device communication - Transport profile - RF wireless - Local area network (wLAN)
  • P1719 (PE/EM) Guide for Evaluating Stator Cores of AC Synchronous Electric Machines Rated 1 MVA and Higher
  • P622 (PE/NPE) Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Systems
  • PC37.237 (PE/PSR) Recommended Practice for Time Tagging of Power System Protection Events
  • P1127a (PE/SUB) IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility - Amendment to Remove References to Substation Slide Library
  • PC37.68 (PE/SWG) Guide for the Requirements for Microprocessor-Based Controls for Distribution Pole-Mount and Padmount Switchgear Rated above 1kV up to 38kV
  • P1547.5 (SASB/SCC21)Guide for Technical Guidelines for Interconnection of Electric Power Sources Greater than 10MVA to the Power Transmission Grid

New Standards

  • 802.1Qbf (C/LM) Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment: PBBTE Infrastructure Segment Protection
  • 1622 (C/SAB) Standard for Electronic Distribution of Blank Ballots for Voting Systems
  • 1792 (PE/NPE) Recommended Practice for Nuclear Power Generating Station Preferred Power Supply Reliability
  • 1900.5 (COM/SC) Standard Policy Language Requirements and System Architectures for Dynamic Spectrum Access Systems
  • C37.30.1 (PE/SWG) Standard Requirements for High Voltage Air Switches for Alternating Current, Rated Above 1,000 Volts
  • C37.118.2 (PE/PSR) Standard for Synchrophasor Data Transfer for Power Systems
  • C37.122.2 (PE/SUB) Guide for the Application of Gas-Insulated Substations 1kV to 52kV

Revision Standards

  • 628 (PE/NPE) Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
  • 1020 (PE/ED&PG) Guide for Control of Small (100 kVA to 5 MVA) Hydroelectric Power Plants
  • 1300 (PE/IC) Guide for Cable Connections for Gas Insulated Substations
  • 11073-10417 (EMB/11073) Health informatics - Personal Health Device Communication Part 10417: Device Specialization - Glucose Meter
  • C37.48.1 (PE/SWG) Guide for the Application, Operation, and Coordination of High-Voltage (›1000 V) Current-Limiting Fuses
  • C37.118.1 (PE/PSR) Standard for Synchrophasor Measurements for Power Systems
  • C57.12.40 (PE/TR) Standard for Network, Three-Phase Transformers, 2500 kVA and Smaller; High Voltage, 34 500 GrdY/19 920 and Below; Low Voltage, 600 Volts and Below; Subway and Vault Types (Liquid Immersed)
  • C57.12.70 (PE/TR) Standard Terminal Markings and Connections for Distribution and Power Transformers
  • C57.12.91 (PE/TR) Standard Test Code for Dry-Type Distribution and Power Transformers
  • C57.91 (PE/TR) Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators
  • C57.98 (PE/TR) Guide to Transformer Impulse Test
  • C57.100 (PE/TR) Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers

Reaffirmations

  • 303-2004 (IAS/PCI) IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
  • 647-2006 (AES/GA) IEEE Standard Specification Format Guide and Test Procedure for Single-Axis Laser Gyros
  • 716-1995 (R2006) (SASB/SCC20) IEEE Standard Test Language for All Systems - Common/Abbreviated Test Language for All Systems (C/ATLAS)
  • 813-1988 (R2005) (AES/GA) IEEE Specification Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned Gyros
  • 833-2005 (PE/NPE) IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
  • 935-1989 (R2006) (PE/T&D) IEEE Guide on Terminology for Tools and Equipment to Be Used in Live Line Working
  • 1184-2006 (PE/SB) IEEE Guide for Batteries for Uninterruptible Power Supply Systems
  • 1220-2005 (C/S2ESC) IEEE Standard for Systems Engineering - Application and Management of the Systems Engineering Process
  • 1255-2000 (R2006) (PE/EM) IEEE Guide for Evaluation of Torque Pulsations During Starting of Synchronous Motors
  • 1284-2000 (R2006) (C/MSC) IEEE Standard Signaling Method for a Bidirectional Parallel Peripheral Interface for Personal Computers
  • 1538-2000 (R2005) (PE/TR) IEEE Guide for Determination of Maximum Winding Temperature Rise in Liquid-Filled Transformers
  • 1546-2000 (R2006) (SASB/SCC20) IEEE Guide for Digital Test Interchange Format (DTIF) Application
  • 14764-2006 (C/S2ESC) IEEE Standard for Software Engineering - Software Life Cycle Processes - Maintenance
  • 16085-2006 (C/S2ESC) IEEE Standard for Systems and Software Engineering - Life Cycle Processes - Risk Management
  • C37.101-2006 (PE/PSR) IEEE Guide for Generator Ground Protection